I would try the ignition switch....... Searched and searched before..... It was after cleaning the engine out, and sometimes there was no voltage to the coil.... Seemed that the cable from the ignition switch to the coil (2.5-4.0 mm yellow cable)had little burned out, and the weakest point is the ig...

And the figures. The torque is low in the middle because of the heavy fuelling, caused by a faulty fuel pressure regulator. Even on idle it's lumpy after a minute after cold start, and always between 2000 and 5000 rpm. https://rcpt.yousendit.com/828102643/9ae0be2981463949ea2b2359e8d41b4f https://rcp...

The movie!
download by you send it:
https://rcpt.yousendit.com/827193763/b1 ... a07b437ef1

148,7 bhp 7020 rpm
154,7 Nm 5480 rpm

bx 16 soupapes mk1 11-1987

first of all, check the mass with an Ohm mtr. it's the problem with older cars, and when you have an other aerial, check the amplifier of it.

ok then, i look at it....

just replace the lot with a alfa 164 item with the same bosch nr., found alot on the scrapheap.

check your ignition lock and your 12v supply of your fusebox

why the exhaust...? You mean the 2 first pipes in-from the manifold? It's not the airfuelmeter, it's not the igniion cables, what's it then? Many pages are written with no def answer. I suspect overall bad connections through the electric cables, so that's why i'm changing the conections now. Also c...

And how's the idling, when hot and cold engine? Have the same problems here with an "88 16v, with D6c xu9j4 engine. Think it's also a bad electronic contact somewhere, but haven's sorten it out yet in a few years. going to renew al the electric contacts by new ones, with the original cables, on...

a new car is born........
Nice!
and change the button of the windscreen wiper for the good color....
Have also a 16 soupapes, with the original license plate etched in the windows......
ciao, Jonne
BX 16 soupapes mk1
C4 110 HDI

Nice one toddmann!

Same, Alfa 4-1.7l, 4-2.0l, v6-2.5l, v6-3.0l, Ford 4-2.0l


0 280 150 702 189cm3/min (18.3 LBS/HR) (3.0 bar)(43.5 PSI)ALFA 3.0L V6(IC-569)

http://www.youtube.com/watch?v=IQYLM3RgN8Q

bx turbo van, haha

always nice to have such a barn with toys...........

There is a way....
http://www.bxsportief.com/forum/phpBB2/ ... light=chip

Still looking also for compete tuned images of the chip, so i can put it on mine mk1 16v. I ve got a friend who can write/make the chips.

greetings, Jonne
bx16v mk1 '88
C4 HDI 110