Search found 67 matches
- Thu Oct 22, 2009 6:06 pm
- Forum: Technical,Tuning and Modification
- Topic: Converting Hurricane into 16 Valve model
- Replies: 18
- Views: 18292
Converting Hurricane into 16 Valve model
Folks, A bit of advice and/or suggestions please. Due to my 16 valver suffering from tinworm I've rebuilt a Hurricane model into a 16 valve version. All parts on this car are standard and the car has been inspected by the DVLA local office and the inspector has passed the car with no problems and th...
- Wed Jul 30, 2008 8:09 pm
- Forum: BX16v.com Chat
- Topic: P R Net ???
- Replies: 6
- Views: 7461
Luke, The website has changed to http://service.citroen.com and you need to register which is free. Depending upon what you want (I tend to use it to check for cost and availability of parts) you can still use it. I'm not sure about the payment side as I only use it for checking. It starts in French...
- Sat Jul 12, 2008 1:48 pm
- Forum: BX16v.com Chat
- Topic: Who's on the road (or could be), who is Not?
- Replies: 192
- Views: 267382
- Thu Nov 22, 2007 8:45 pm
- Forum: Wanted
- Topic: Flow Distributor
- Replies: 0
- Views: 2943
Flow Distributor
Nuts! Passed MOT but needs a flow distributor, fitted one leaks through end cap, power steering weak as a result. Anyone have a spare one?
Cheers.
Cheers.
- Fri Nov 09, 2007 9:02 pm
- Forum: Wanted
- Topic: Hydraulic return hose
- Replies: 6
- Views: 6977
- Fri Nov 09, 2007 8:44 am
- Forum: Wanted
- Topic: Hydraulic return hose
- Replies: 6
- Views: 6977
- Thu Nov 08, 2007 4:16 pm
- Forum: Wanted
- Topic: Hydraulic return hose
- Replies: 6
- Views: 6977
Hydraulic return hose
Help!
Does anyone have a spare return hose; the one that comes from the flow distributor and height correctors? Mine's split where it joins the rubber manifold which joins to the reservoir. I believe this is not included as part of the octopus kit (at least it wasn't with the GSF one).
Cheers,
DG.
Does anyone have a spare return hose; the one that comes from the flow distributor and height correctors? Mine's split where it joins the rubber manifold which joins to the reservoir. I believe this is not included as part of the octopus kit (at least it wasn't with the GSF one).
Cheers,
DG.
- Fri Aug 10, 2007 12:44 am
- Forum: Technical,Tuning and Modification
- Topic: Sump Gaskets?
- Replies: 9
- Views: 8107
- Sun Aug 05, 2007 4:31 pm
- Forum: Technical,Tuning and Modification
- Topic: Sump Gaskets?
- Replies: 9
- Views: 8107
- Sun Aug 05, 2007 11:01 am
- Forum: Technical,Tuning and Modification
- Topic: Sump Gaskets?
- Replies: 9
- Views: 8107
- Sun Aug 05, 2007 10:44 am
- Forum: Technical,Tuning and Modification
- Topic: Sump Gaskets?
- Replies: 9
- Views: 8107
The sump is the alloy aircon sump. It's had a gasket between the spacer and sump since new. You're probably right about clean surfaces though; when the spacer was removed the oil had penetrated right through the sealant. The engine has been rebuilt and this is the only leak. Making a new gasket woul...
- Sun Aug 05, 2007 10:16 am
- Forum: Technical,Tuning and Modification
- Topic: Sump Gaskets?
- Replies: 9
- Views: 8107
Sump Gaskets?
Folks,
Anyone else had trouble making the joint between the crankcase and spacer above the sump leakproof? I'm on my third attempt to seal this, have had no success so far, and was wondering if using a sump gasket rather that sealant (as recommended) would cure this?
Any ideas?
Cheers.
Anyone else had trouble making the joint between the crankcase and spacer above the sump leakproof? I'm on my third attempt to seal this, have had no success so far, and was wondering if using a sump gasket rather that sealant (as recommended) would cure this?
Any ideas?
Cheers.
- Sat Apr 21, 2007 2:52 pm
- Forum: Wanted
- Topic: Wanted-loan of an AFM
- Replies: 3
- Views: 4453
- Wed Mar 28, 2007 6:38 pm
- Forum: Wanted
- Topic: HP Pump to Flow Valve Pipe
- Replies: 9
- Views: 7427