Rear wheel arch covers

Make requests for parts and cars here
Post Reply
Gary C
4000 rpm
Posts: 430
Joined: Thu Aug 03, 2006 5:36 pm
Location: Gatwick
Contact:

Rear wheel arch covers

Post by Gary C » Mon Jun 21, 2021 6:33 pm

Maybe someone has already looked into this.

Looking to borrow (buy if needs be) a pair of rear arch covers/spats. Want to see if new ones can be made in a small batch run at a reasonable cost.

The ones I have are on the car, and not in the best of nick.

Perhaps the front wing parts could be made as well (I know Chevronics had some new at £40).

Would anyone be interested in any of these parts?

User avatar
Dave
3000 rpm
Posts: 182
Joined: Fri Aug 18, 2006 7:43 pm
Location: depends where it takes me.

Re: Rear wheel arch covers

Post by Dave » Wed Jun 23, 2021 6:52 pm

Hi Gary,

Just so you know someone is seeing your posts, I thought I would respond to this. Right now I am fine but I think they are the type of part that anyone could need at some point because of general depreciation or damage. They would be a nice to have but there are so many bits that would fit that category. If anyone is needing them now and a mould or whatever is created, being able to get more at a later date even at higher cost in fewer or one off orders would be useful.

Let's see what turns up although it's been a bit quiet on here for a while.
Prefer it to the Lamborghini, like Signor Gandini!

User avatar
RobC
3000 rpm
Posts: 226
Joined: Mon Aug 07, 2006 11:52 am
Location: East London

Re: Rear wheel arch covers

Post by RobC » Thu Jun 24, 2021 9:38 am

I would be interested in the front arch trim for a phase 2 16v- the bit that’s stuck onto the wing just behind the front wheel (near side only, after mine fell off on the A1 a few years back!). Is that the piece you’re referring to?

Gary C
4000 rpm
Posts: 430
Joined: Thu Aug 03, 2006 5:36 pm
Location: Gatwick
Contact:

Re: Rear wheel arch covers

Post by Gary C » Sun Jul 11, 2021 4:09 pm

Looking at the whole body kit really but mainly the spats and arches. The skirts are fairly easily repaired so probably not so in demand, plus I have a few spare bits. Front wing spats and rear arch covers have sustained a lot of damage over the years (rubbing is racing some say, I don't agree).

Post Reply