EOI D6C Pistons

Make requests for parts and cars here
Post Reply
User avatar
frog
3000 rpm
Posts: 163
Joined: Sat Feb 26, 2011 2:56 pm
Location: Australia

EOI D6C Pistons

Post by frog »

Hi all,

Does anyone know where I could find some of the High compression D6C/XU9J4 pistons? They're the ones with "Z" stamped on the crown.

My car has the DFW/XU9J4Z with the "X" stamped pistons that sit much further down the bore.

I'm not looking to buy immediately, more checking out availability/feasibility.

Cheers,
Chris
badlyworntoy
3000 rpm
Posts: 179
Joined: Tue Dec 08, 2009 5:43 pm
Location: middlesbrough

Post by badlyworntoy »

Chris
I have a couple of sets of D6C pistons.The DFW ones actually only have 0.8mm less on the piston crowns reducing the comp ratio from 10:4:1 to 9:7:1.I have a set of DFW's in a D6C because its supercharged.You will also need to change the cam pullys.Also if you change the pistons i think you need a number 2# and 3# Cam pullys which I also have.
Let me know if you want them

cheers
1991 Citroen Bx 16v phase 2
1972 Vauxhall Viva HC 16v C20XE
1993 Nissan Pulsar GTI-R
1983 Vauxhall Chevette 2.0 Pinto
1991 Lada Riva (still having ideas)
User avatar
frog
3000 rpm
Posts: 163
Joined: Sat Feb 26, 2011 2:56 pm
Location: Australia

Post by frog »

Thanks! I'll let you know some time if I plan to go ahead with it/have the cash.
Best regards
Post Reply