It wasn't my fault

All chat, general/off topic/banterish and questions relating to the BX16valve.
User avatar
SimonA
Tick Over
Posts: 82
Joined: Thu Apr 26, 2007 6:58 pm
Location: Exeter

It wasn't my fault

Post by SimonA »

Nice Sunday afternoon in the sun on the Quay. Driving along at 20 when some tosser doing nearer 40 swerved around a parked car, crossed the centre line and got me. I travelled 3-4 metres before stopping he managed 10 or more :(

The good thing is no one was hurt.

It looks bad, it is bad, no drive, front doesn't rise and I'm gutted.

Looks like a write off to me :(


Bet I can't get the pics to load !
Last edited by SimonA on Mon Oct 22, 2007 9:25 am, edited 1 time in total.
... and there are unknown unknowns
User avatar
Jezziebx16v
Moderator
Posts: 571
Joined: Tue Jun 27, 2006 3:13 pm
Location: Alberta, Canada

Post by Jezziebx16v »

:( Pictures don't work but by the sounds of it it dont look good.
Gutted for you Simon, hope you manage to get a good insurance claim out of it to replace your 16v, not much comfort I know but at least you are all OK and that IS the main thing.

Really sorry to be reading your bad news.

Jez

PS if your having probs with the pics, mail them to me and i'll post them up for you.
Past 16v's: 89 Ph1 Black, 90 Ph2 Grey, 89 Ph2 Black, 91 Ph2 Grey, 91 Ph2 Black.

Now. 94 Datsun Silvia S14 rice rocket, 85 Peugeot 505 Turbo, 77 Ford Capri.
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

Oh No! doesnt sound good matey!
glad everyone is okay though!

picture links dont work am afraid, may need to upload them to photobucket (http:photobucket.co.uk) then paste the IMG link!
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
tim leech
7000 rpm
Posts: 1187
Joined: Sun Aug 06, 2006 9:25 pm
Location: derbyshire

Post by tim leech »

Ahh sh*t, thats 2 this year! Im sure between us we have enough parts to fix it if its saveable.
User avatar
Jezziebx16v
Moderator
Posts: 571
Joined: Tue Jun 27, 2006 3:13 pm
Location: Alberta, Canada

Post by Jezziebx16v »

Image
Image
Past 16v's: 89 Ph1 Black, 90 Ph2 Grey, 89 Ph2 Black, 91 Ph2 Grey, 91 Ph2 Black.

Now. 94 Datsun Silvia S14 rice rocket, 85 Peugeot 505 Turbo, 77 Ford Capri.
tim leech
7000 rpm
Posts: 1187
Joined: Sun Aug 06, 2006 9:25 pm
Location: derbyshire

Post by tim leech »

Oh dear, thats dead.
Vanny
Web Support
Posts: 1570
Joined: Tue Jun 06, 2006 10:11 am
Location: BXProject
Contact:

Post by Vanny »

i have some of the parts to rebuild the superficial side of things, but i think i have to agree i doubt that will make it back to the road! Shame there are no good valvers on the bay at the moment.

Thats a scary sight i hope i never have to see in the flesh.
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

Dear lord thats not good!! took out 1/4 of the outer rim edge too! some impact!
glad your all okay though!
could have been a lot worse!!!
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
tim leech
7000 rpm
Posts: 1187
Joined: Sun Aug 06, 2006 9:25 pm
Location: derbyshire

Post by tim leech »

What hit you Simon?
ollie
4000 rpm
Posts: 310
Joined: Thu Aug 03, 2006 9:32 am
Location: BIRMINGHAM

Post by ollie »

um, not as bad as you might think! have just scrapped a TD that did the same thing ramming a van!! just needs a subframe and a new strut.
Door and wing are easy and pillars prob OK as the wheel looks to have taken the brunt of the load didn't fix the TD cos its valuless, but a valver? I dod have sapre car in the garden complete reday for robbing :lol: :lol:
User avatar
SimonA
Tick Over
Posts: 82
Joined: Thu Apr 26, 2007 6:58 pm
Location: Exeter

Post by SimonA »

As if I need another reason to hate them ... a Vauxhall Cavalier.

There is unfortunately some buckling of the A post but we will see and I'm stubborn (I already have a guy at work after the engine, ecu and loom for his 205 :x )

My mechanics / body shop are very good and will do a thorough assessment and all and we will see. I have 4 speedlines in need of refurbishment (I got the ones on the car off ebay a few weeks back). My concern is all the bits and pieces that are a knock on effect from the bash ... just when it wasn't leaking too ... well I did want a full respray ... you've spent HOW much on it !!!

I also realised Sunday was 10 years to the day since I arrived from New Zealand ! Happy Anniversary ... not !
... and there are unknown unknowns
User avatar
MoRtYMer
3000 rpm
Posts: 127
Joined: Mon Jul 03, 2006 1:31 pm
Location: Portugal

Post by MoRtYMer »

Man that sucks... :(

Lets hope you can be repair it and bring it back to the road.
Image
tim leech
7000 rpm
Posts: 1187
Joined: Sun Aug 06, 2006 9:25 pm
Location: derbyshire

Post by tim leech »

SimonA wrote:As if I need another reason to hate them ... a Vauxhall Cavalier.

There is unfortunately some buckling of the A post but we will see and I'm stubborn (I already have a guy at work after the engine, ecu and loom for his 205 :x )

My mechanics / body shop are very good and will do a thorough assessment and all and we will see. I have 4 speedlines in need of refurbishment (I got the ones on the car off ebay a few weeks back). My concern is all the bits and pieces that are a knock on effect from the bash ... just when it wasn't leaking too ... well I did want a full respray ... you've spent HOW much on it !!!

I also realised Sunday was 10 years to the day since I arrived from New Zealand ! Happy Anniversary ... not !

I hope it killed the Cavalier!
User avatar
SimonA
Tick Over
Posts: 82
Joined: Thu Apr 26, 2007 6:58 pm
Location: Exeter

Post by SimonA »

Of course ... his wheel was folded under and at an appropriate angle of death !
... and there are unknown unknowns
User avatar
kriskarrera
Tick Over
Posts: 98
Joined: Mon Sep 18, 2006 9:54 pm
Location: Wiltshire

Post by kriskarrera »

I already have a guy at work after the engine, ecu and loom for his 205
I hope you said no!! :D
XU9J4 4ever
Post Reply