My days work in a Citroen workshop

All chat, general/off topic/banterish and questions relating to the BX16valve.
Post Reply
User avatar
Jezziebx16v
Moderator
Posts: 571
Joined: Tue Jun 27, 2006 3:13 pm
Location: Alberta, Canada

My days work in a Citroen workshop

Post by Jezziebx16v »

After having aggro trying to remove a rounded bolt from my rotor arm, i spoke to my mechanic on Monday to get him to sort it out for me, but his reply was "i am snowed under this week and my sidekick is on holiday so it will have to be next week, but if you bring it down you can do it yourself", and he also asked if i wanted to help him for the day.

So today was booked off from work yesturday 8). It's been like i was 15 again and on a work placement :lol: Done a radiator on a Rover 600,(yeah i know its not a Cit) serviced a Saxo, done the best part of the rear arm bearing on a Bx estate, sorted out my rotor arm, fitted a lower speedo cable and treated the 16v to an oil flush and refil with 5/40 synthetic oil :D .

All in all it has been a fun day, work of a completly different type which is always nice plus my wages turned out to be the cost of all the parts i used on my car so as you can guess i'm well chuffed and the car is now running sweet. :P


Jez
Past 16v's: 89 Ph1 Black, 90 Ph2 Grey, 89 Ph2 Black, 91 Ph2 Grey, 91 Ph2 Black.

Now. 94 Datsun Silvia S14 rice rocket, 85 Peugeot 505 Turbo, 77 Ford Capri.
User avatar
Toddman
Administrator
Posts: 1318
Joined: Mon Jun 26, 2006 9:02 pm
Location: Lincolnshire
Contact:

work

Post by Toddman »

Sweet 8)
Sounds like a fun and rewarding days work
Although hope you got your hands clean after worlin ona Rover :evil:

Cheers
Luke
Please call me Luke :)
1989 BX 16valve White 70k almost up to scratch
Anonymous

Re: work

Post by Anonymous »

Toddman wrote:Sweet 8)
Sounds like a fun and rewarding days work
Although hope you got your hands clean after worlin ona Rover :evil:

Cheers
Luke
Lol, I worked on a authorized Rover/MG dealer before, still got a little itch after that :lol:
User avatar
Jezziebx16v
Moderator
Posts: 571
Joined: Tue Jun 27, 2006 3:13 pm
Location: Alberta, Canada

Post by Jezziebx16v »

:lol: :lol: yeah i washed hands as i did after moving an RS1600i TT convertion :twisted:


Jez
Past 16v's: 89 Ph1 Black, 90 Ph2 Grey, 89 Ph2 Black, 91 Ph2 Grey, 91 Ph2 Black.

Now. 94 Datsun Silvia S14 rice rocket, 85 Peugeot 505 Turbo, 77 Ford Capri.
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

nice one matey! sounds like bl##dy good fun that!
top stuff and good news for getting yours sorted!
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
tecw1979

Post by tecw1979 »

nowt wrong with a rs1600i, and certainly nothing wrong with the tt conversion if a very skilled owner fitted it! ive been out in one such car and it was amazing for a pretty standard 1.6 with a few bolt on bits!

although i would rather drive a bx 16v... :P
ollie
4000 rpm
Posts: 310
Joined: Thu Aug 03, 2006 9:32 am
Location: BIRMINGHAM

Post by ollie »

Agree, theres nowt wrong with the 1600i, its the others lesser models that get the bad reputation! Nearly bought one when they were a few hundred quid..... went up in price, a few months later, argh
Just sold my Bros 1.6 orion which he modded a bit, suprisingly nice to drive, and will out corner the BX all day long on shitty mis match tyres...
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

Ollie, guessing the onion wasnt on std shocks then! they were seriously barge like on std gear! best mate had a couple! and have driven many in my time!
anyways! enough of this ford talk on the Bx forum! :wink: :D
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
User avatar
robin hughes
5000 rpm
Posts: 592
Joined: Mon Sep 04, 2006 5:08 pm
Location: st austell, cornwall

Post by robin hughes »

dont get me started lol :lol:
User avatar
Toddman
Administrator
Posts: 1318
Joined: Mon Jun 26, 2006 9:02 pm
Location: Lincolnshire
Contact:

cars

Post by Toddman »

My cousinn has a good condition 1600i - I didn't want to say nice :D but he is rebuilding it with a turbo lump.
I had an orion with full RS pack which allegedly had better springs and shocks and I can safely say my valver would run rings round it in every stretch of driving.

Cheers
Luke
Last edited by Toddman on Sat Sep 09, 2006 8:28 pm, edited 1 time in total.
Please call me Luke :)
1989 BX 16valve White 70k almost up to scratch
User avatar
robin hughes
5000 rpm
Posts: 592
Joined: Mon Sep 04, 2006 5:08 pm
Location: st austell, cornwall

Post by robin hughes »

ive had 3 mk2 orion 1.6i ghias which were all standard. my last one was a minter and i only parted with it for the rst. they handle ok for an 80s car but a standard set up wouldnt out do the bx and same goes for the escort rst. i dont know what they handle like when modded and polly bushed though?
User avatar
Adrian E
Moderator
Posts: 569
Joined: Wed Jul 12, 2006 10:09 pm
Location: Surrey, UK

Post by Adrian E »

mate of mine had an Orion 1.6 Ghia with decent lowered suspension, tarox brakes, Janspeed exhaust, Yokohama tyres and a decent head - went like stink, and handled very well (can't remember the suspension kit, but remember it was pukka at the time)

Had it from new, did 150k between father and son before it ended up wrapped around a tree - only after getting written off by a police car on a blind crest in Cornwall
Post Reply