Robin H's Car cleaned!! Warning LOTS of pics!!!

All chat, general/off topic/banterish and questions relating to the BX16valve.
Post Reply
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Robin H's Car cleaned!! Warning LOTS of pics!!!

Post by Timmo »

Well today popped up to see rob today as the wife was away for the day and rob had asked if I could have a look at his car for him!
Rob had washed it for me ready but due to it being sat out side for so long it had gone to several various shades of dull red! :(
Unfortunately it wasn’t to be an easy couple of coats of polish effort so got the machine out and set about the full machine polish! No time constraints on today so took my time whilst cahating to rob and his mate rob and a neighbour lol!
I wont go into all the details but will let the pics show it!
A few before’s!
Image
Image
Image
Image
Image

one of the half and half shots of the cleaner polish on the spoiler to show how bad it has got!! (left side from the wiper had 2 coats of the cleaner polish!!)
Image

Couple of the during machining shots!
(you can see in the first and second on the skirt where it has and hasn’t been done!!)
Image
Image
Image
Image
Image
Image

Finished the machining and cleaned the paint ready for the polish and wax! (yes it is my little one in the car seat in the garage!!! got to teach her early!!!:D)
Image
Image
Image

Quick polish to clean and deepen the shine before the waxing!
Image
Image
Image

And the final finished waxed shots!!! Nice deep crisp reflection through out the car too which was what I was after! :D
Image
Image
Image
Image
Image
Image
Image
Image
Image

I think that just about covers it!!
Total time taken 3 ½ hour from start to finish!
Rob was chuffed with it in the end, which is what matters lol! I am pleased also heheh! Although really suffering from it now!L
Sorry for the amount of pics (took me a while to narrow them down!!(51 pics in total!!)
Hope you like them!!!

(luke if you think there’s too many let me know and ill link them instead!)
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
Anonymous

Post by Anonymous »

Pfff great result :!:

and very satisfactory when you're ready!
Anonymous

Post by Anonymous »

Nice job Timmo, I'll bet Rob's well chuffed. So, how long will that last for?, do you need to keep re-applying wax & polish regularly.

Take's me 3.5 hrs to do one 'pass' of polish on mine :shock:
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

Tony realistically it ought to last for a good 6 months minimum of being left out in the sun and not touched!
the machine polishing cuts through and removes the cr#p on the panels and brings the pigment back to the surface leaving a clean and shiny bright fresh finish!
the wax i use lasts for a good 4 weeks of u.k. weather with out the need for topping up and only one wash in that time!
there is no reason why that if rob was to wash it and polish with say super resin polish and a coat of wax every 3-4 weeks that it would need to be machined again!
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

I forgot to say ont he way home this popped up too!
Image
(sorry for the shakyness! was goign well until i got to the speedbump :shock: :roll: :D :wink: !!!)
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
User avatar
Kitch
5000 rpm
Posts: 737
Joined: Sun Aug 06, 2006 12:52 pm

Post by Kitch »

You wanna double check your oil pressure mate :shock:

Unless the gauge/sender is knackered?
Vanny
Web Support
Posts: 1570
Joined: Tue Jun 06, 2006 10:11 am
Location: BXProject
Contact:

Post by Vanny »

I HATE YOU ROB

timmo, i'll be round as soon as i have enough bottles of water to make the journey, whats the average fee?


house mates comment, 'thats shiney' and he drives an Astra!
User avatar
djoptix
4000 rpm
Posts: 450
Joined: Wed Aug 09, 2006 7:05 pm
Location: Manchester
Contact:

Post by djoptix »

Kitch wrote: Unless the gauge/sender is knackered?
My oil pressure guage is strictly for entertainment purposes only. Unless the pressure really does vary between 0 and 6 on an average trip, in which case I suppose I should be worried :?
Red phase 1, 84k
Silver phase 1, 67k
"Man who run in front of car get tyred; man who run behind car get exhausted..."
User avatar
Kitch
5000 rpm
Posts: 737
Joined: Sun Aug 06, 2006 12:52 pm

Post by Kitch »

djoptix wrote:
Kitch wrote: Unless the gauge/sender is knackered?
My oil pressure guage is strictly for entertainment purposes only. Unless the pressure really does vary between 0 and 6 on an average trip, in which case I suppose I should be worried :?
Lol. I 've read that on the 205 forum before now too.
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

Kitch! the oil pressure gauge is a little on the iffy side matey! it kind of randomly chooses a spot to sit in then bounces around all over the place then stops then bounces etc etc !!! and hte oil level section of its about as much use as a chocholate fire guard!

Vanny, price isnt as much as you would think matey! if your really intersted drop me a pm and i wil let you know!!
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
User avatar
Mike P
Moderator
Posts: 1183
Joined: Mon Jul 03, 2006 11:46 am
Location: Leicester, UK

Post by Mike P »

What't your rate for doing mine the Saturday before FCS'07 :?: :D

Mike P.
Founder member of the Phase 1 Appreciation Society!
- - - - -
'88 'F' White Bx16v - 62k miles & as seen on TV
User avatar
Toddman
Administrator
Posts: 1318
Joined: Mon Jun 26, 2006 9:02 pm
Location: Lincolnshire
Contact:

polish

Post by Toddman »

mmmmmmm shiney 8)

Cheers
Luke
Please call me Luke :)
1989 BX 16valve White 70k almost up to scratch
Anonymous

Post by Anonymous »

Good job Timmo 8)
Post Reply