16V Phase 2 parts (with prices)

Offer your parts and cars for sale here.
Himbo
Tick Over
Posts: 22
Joined: Thu Feb 04, 2010 8:59 pm
Location: Sheffield

16V Phase 2 parts (with prices)

Post by Himbo »

Here is a list of some of the spares; (note, some of the items I have 2 of (x2))

Engine block with recent re-hone of bores+rings, recent big-end shells. £50
Complete cylinder head. £45 (x2)
Inlet manifold with fuel rail/throttle body/coil. £30
Another throttle body. £10 - SOLD
Exhaust manifold. £10 (x2) - SOLD
Set of hardley used hydraulic tappits. £15 - SOLD
Gearbox. £60 - SOLD
Le Manns velour interior, f/r seats + door cards. £80
Bonnet. £25 - SOLD
Tailgate. £35
Four mint doors. £60
Front wings, light scratches. £30 (pair)
Front wings good. £45 (pair) - SOLD
Front bumper. £75 - SOLD
Rear bumper. £75 - SOLD
Rear bumper, small crack on 1 corner £50
Front leather head-rests. £20 (pair) - SOLD
Rear leather seats. £30
Engine management with BBR de-limited chip. £30
Drive shafts. £25 (pair)
Front brake calipers. £25 (pair) - SOLD
Rear brake calipers. £10 (pair)
Front suspension struts. £40 (pair)
HP pump. £15 - SOLD
Flow valves. £10
Power steering rack/ram. £25
Brake valve. £10
Rear swing arms with good bearings. Complete with hubs. £30 (pair) - SOLD
Front hubs. £20 (pair)
Wishbones. £20 (pair)
Track rod ends/ball joint. £10 (pair)
Dash with vents/trays etc. £20 - SOLD
Glove box. £10 - SOLD

Regards
Mark
Last edited by Himbo on Fri Apr 16, 2010 7:15 pm, edited 9 times in total.
oldred
Posts: 1
Joined: Sun Feb 21, 2010 4:39 pm
Location: south coast

Re: 16V Phase 2 parts (with prices)

Post by oldred »

Himbo wrote:Engine management with BBR de-limited chip. £30
Hi mate hows it going? Does this come with the loom and sensors?

Cheers, Big Red
To the BXTREME
Himbo
Tick Over
Posts: 22
Joined: Thu Feb 04, 2010 8:59 pm
Location: Sheffield

Post by Himbo »

Hi Oldred

No it's just the Bosch ECU.

I've had a quick look and I do have the loom with the round connector that supplies the injectors/aux air valve. Also I have the loom with the rectangular white connectors that supply the temp sensors.

Sensor wise I have an air flow meter. I should have the power amp somewhere for the ignition plus the loom for that.

Let me know what you are after and we'll sort a price?

Mark.
User avatar
Toddman
Administrator
Posts: 1318
Joined: Mon Jun 26, 2006 9:02 pm
Location: Lincolnshire
Contact:

parts

Post by Toddman »

PM sent :D

Put me down for the HP pump and an exhaust manifold.

Thanks
Luke
Please call me Luke :)
1989 BX 16valve White 70k almost up to scratch
Mandic
4000 rpm
Posts: 250
Joined: Mon Jul 03, 2006 10:59 am
Location: Ljubljana, Slovenia

Post by Mandic »

Are tappets OEM?

If so, I'll take them.


Cheers

Ziga
Image Don't run your life on diesel
Himbo
Tick Over
Posts: 22
Joined: Thu Feb 04, 2010 8:59 pm
Location: Sheffield

Post by Himbo »

The tappets were not from Citroen. They were from are reputable engine rebuilders in Sheffield (Beckett and Garner) where I had all my head work done. They have done less than 500miles.

Mark
mechuccio
3000 rpm
Posts: 176
Joined: Tue Dec 19, 2006 3:18 pm
Location: Roermond, The Netherlands
Contact:

Post by mechuccio »

Would you be willing to send some of those parts to the Netherlands?
I'm interested in the leather headrests and maybe one of the cilinder heads.
You can't spell slaughter without laughter ->I just love my 16V<-
Himbo
Tick Over
Posts: 22
Joined: Thu Feb 04, 2010 8:59 pm
Location: Sheffield

Post by Himbo »

Best postage costs I can find for the Netherlands is £18 for the headrests or £45 for the headrests and the cylinder head (assuming the parcel does not go over 50kg).

Let me know what you would like?

Regards,
Mark.
mechuccio
3000 rpm
Posts: 176
Joined: Tue Dec 19, 2006 3:18 pm
Location: Roermond, The Netherlands
Contact:

Post by mechuccio »

Hi Mark,

I'm very interested in the headrests, I'll leave the cilinderhead for what it is for now, maybe next month if it's still available.
Do you have a Paypal account or shall I use a bank2bank transfer?
PM me the details and I'll send you the 38 GBP.

Cheers,

Tonie
You can't spell slaughter without laughter ->I just love my 16V<-
scubacal
Posts: 1
Joined: Sun Mar 07, 2010 6:54 am
Location: Indonesia

Post by scubacal »

Hi Himbo... is the round loom for BX16 valve... i need it for my 16valve project... but will you ship it to Indonesia? do you have paypal account for the payment?

cheers
Faisal


Himbo wrote:Hi Oldred

No it's just the Bosch ECU.

I've had a quick look and I do have the loom with the round connector that supplies the injectors/aux air valve. Also I have the loom with the rectangular white connectors that supply the temp sensors.

Sensor wise I have an air flow meter. I should have the power amp somewhere for the ignition plus the loom for that.

Let me know what you are after and we'll sort a price?

Mark.
surjit25
4000 rpm
Posts: 316
Joined: Thu Feb 07, 2008 3:16 pm
Location: Kuala Lumpur,Malaysia

Post by surjit25 »

Faisal, you converting a BX16..to 16V
icrc
Tick Over
Posts: 27
Joined: Thu Jul 23, 2009 12:01 pm
Location: Taiwan,Taipei

Post by icrc »

hello,

I want the 2 front seats, but I lived in Taiwan...

how much if send to here?

Thank you...

and Could I look the picture of front seat?
my E-mail is eric234kimo@hotmail.com

Thank you very much...
I like Citroen so much.Now I have a BX TZi and BX 19 GTi...and had convertted TZi to GTi 16V... It's wonderful !
AussieValver
Posts: 4
Joined: Sun Mar 29, 2009 12:08 pm
Location: QLD Australia

Post by AussieValver »

"Dash with vents/trays etc. £20"
Is it a black dash?
No cracks or splits?
if so any idea what it would cost to send to the Gold Coast, Australia?
I am quite interested if it's at all viable.
As you may know, they all crack in the Aussie sun.
Cheers
Bernie
NZ16v
3000 rpm
Posts: 203
Joined: Sun Apr 06, 2008 12:43 am
Location: New Zealand

Post by NZ16v »

OI ozzie, 16vs came out with ONLY black dash, no exceptions on that one,despite all the engine/trim/bodywork changes over the years!
Would rather be driving ONE 16v,than fixng TWO.
AussieValver
Posts: 4
Joined: Sun Mar 29, 2009 12:08 pm
Location: QLD Australia

Post by AussieValver »

NZ16v wrote:OI ozzie, 16vs came out with ONLY black dash, no exceptions on that one,despite all the engine/trim/bodywork changes over the years!
Yeah, thanx.
New that was the case here, wasn't sure about the rest of the world. esp as I have seen different trim combinations overseas.

Back on subject, all I really need is the demister vent panel, should be light enough but a bit baulky. If freight isn't too much I am keen to get one.

Cheers,
Bernie
Post Reply