Performance French Car magazine
-
- Tick Over
- Posts: 23
- Joined: Wed Aug 16, 2006 3:41 pm
- Location: Middle England
- Contact:
Performance French Car magazine
Hi all,
I was asked to write a piece about the 16V for PFC magazine (now under new ownership, let's see where it goes), and was surprised that none of you have picked up on the fact...
It's a four-page colourful feature, nicely sympathetic to the cause, and all positive stuff for the car...
I suppose I was just worried I'd made some boo-boos, that you might have spotted
K
I was asked to write a piece about the 16V for PFC magazine (now under new ownership, let's see where it goes), and was surprised that none of you have picked up on the fact...
It's a four-page colourful feature, nicely sympathetic to the cause, and all positive stuff for the car...
I suppose I was just worried I'd made some boo-boos, that you might have spotted
K
No BX 16V in my life at the mo...
- Timmo
- Full Throttle
- Posts: 2233
- Joined: Tue Jun 27, 2006 3:30 pm
- Location: Cornwall! Tis where they make Oggy's!
- Contact:
sorry keith! i have the mag (have had a copy of every single issue from day one!!) and thought the article was good!
there is a thread on bxclub about it!
the Kelsey Boys only had 2 weeks to get the issue done and out and considering that i dont think they did a bad job!! although a coupe of the articles were a bit soft!!
but the write up on the bx was a good one1 thank you! have been pestering James fromunity for a long time to get one in the mag!! shame it hads to wiat for the new guys!
there is a thread on bxclub about it!
the Kelsey Boys only had 2 weeks to get the issue done and out and considering that i dont think they did a bad job!! although a coupe of the articles were a bit soft!!
but the write up on the bx was a good one1 thank you! have been pestering James fromunity for a long time to get one in the mag!! shame it hads to wiat for the new guys!
Timmo
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
-
- Tick Over
- Posts: 23
- Joined: Wed Aug 16, 2006 3:41 pm
- Location: Middle England
- Contact:
Timmo,
Thanks for your kind comments - they're much appreciated.
Anyway, there's more to come from that series - but it seemed fitting to start with the BX 16V, a subject I have a degree of passion about. I hope it's done some good for the cause...
And if you could post me a link for the thread, I'm really appreciate that.
Regards,
Keith
Thanks for your kind comments - they're much appreciated.
Anyway, there's more to come from that series - but it seemed fitting to start with the BX 16V, a subject I have a degree of passion about. I hope it's done some good for the cause...
And if you could post me a link for the thread, I'm really appreciate that.
Regards,
Keith
No BX 16V in my life at the mo...
PFC
Hi Keith
Good to hear from you
My copy of the mag arrived a couple of days ago but only just got round to looking at it - I am administrator of the PFC forum and get rewarded with a mag to look at.
Nice article and should prove to be a popular series in the mag, I assumed it was you who had penned it and it did read very well. Only thing missing was a mention of the owners club
I have had a natter with a few of the Kelsey people and they seem optimistic about the mags future and generally a good bunch.
Cheers
Luke
Good to hear from you
My copy of the mag arrived a couple of days ago but only just got round to looking at it - I am administrator of the PFC forum and get rewarded with a mag to look at.
Nice article and should prove to be a popular series in the mag, I assumed it was you who had penned it and it did read very well. Only thing missing was a mention of the owners club
I have had a natter with a few of the Kelsey people and they seem optimistic about the mags future and generally a good bunch.
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
- Timmo
- Full Throttle
- Posts: 2233
- Joined: Tue Jun 27, 2006 3:30 pm
- Location: Cornwall! Tis where they make Oggy's!
- Contact:
Here you go matey!
http://www.bxclub.co.uk/forum/viewtopic.php?t=8356
http://www.bxclub.co.uk/forum/viewtopic.php?t=8356
Timmo
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
-
- Tick Over
- Posts: 23
- Joined: Wed Aug 16, 2006 3:41 pm
- Location: Middle England
- Contact:
mag
Should be still available Tim - WHS are usually a safe bet and you are looking for issue number 1 as it is the first mag from the new publisher.
Cheers
Luke
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
- Timmo
- Full Throttle
- Posts: 2233
- Joined: Tue Jun 27, 2006 3:30 pm
- Location: Cornwall! Tis where they make Oggy's!
- Contact:
Tim, New issue is due out this thursday matey (2nd thursday of the month), so may be sparce on the shelves lunchtime onwards! most of the bigger tesco's have it now!
If yo uget stuck i'll send up my copy matey!
If yo uget stuck i'll send up my copy matey!
Timmo
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
mag
Good news is that the new publishers are planning to enable online ordering of single back issues so if you are hard pushed to get a copy you will be able to get them later. Should even be able to get hold of the Gary Cole articles that were very good.
Cheers
Luke
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
- kriskarrera
- Tick Over
- Posts: 98
- Joined: Mon Sep 18, 2006 9:54 pm
- Location: Wiltshire
-
- Tick Over
- Posts: 23
- Joined: Wed Aug 16, 2006 3:41 pm
- Location: Middle England
- Contact:
- docchevron1472
- 4000 rpm
- Posts: 336
- Joined: Tue Aug 22, 2006 10:53 am
- Location: The End of the World
- Contact: