Does anyone have these clips - It's the clips which lock/hold the cables in place onto the heater control facia and also the other end of the cable (heater tap/valve).. (see pic attached)
I need 3 of these asap...
And need 1 cable - for the heater control (ie. from the control facia to the heater tap/valve)
Here's hoping..
Heater control cable and clips needed! Urgent!
Heater control cable and clips needed! Urgent!
Fury D
----------------------------
Current: BX GTi 16V PhII - Grey [Gunmetal]
----------------------------
Current: BX GTi 16V PhII - Grey [Gunmetal]
I assume you picked them up okay? Either that or a strange person went to the other halfs house demanding BX parts (whcih really wouldnt surprise me!).
Oh and on the GTi front, its looking very much like it will be racing in 2010! So not bing broken (though most of the inards will come out). Initially Autosolo, then some classic stage rallys!
Oh and on the GTi front, its looking very much like it will be racing in 2010! So not bing broken (though most of the inards will come out). Initially Autosolo, then some classic stage rallys!
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland
Hi guys... sorry for the late response! Just got back to work today and can confirm I have collected the control unit/cables/clips. (Big thanks to Vanny)..
Thanks also to Rossco and Luke.. appreciate the help chaps
Will be updating the info in the members section re: the car very soon. I have all the parts needed and will be fitting everything back (hopefully) today.
Nothing urgent remaining.
There is one more broken part i've come accross which can be replaced at a later date, but if anyone has one at hand, please do LMK. I need a handbrake switch (the plastic casing around mine has crumbled!) - I'll be temporarily 'fixing' the switch into place.
BTW, I'm also looking for a "Tailblazer" - either semi-tint or standard.. LMK again if anyone has a spare or wants to part with theirs!
Thanks again to all who've been actively sourcing the cables/clips
Thanks also to Rossco and Luke.. appreciate the help chaps
Will be updating the info in the members section re: the car very soon. I have all the parts needed and will be fitting everything back (hopefully) today.
Nothing urgent remaining.
There is one more broken part i've come accross which can be replaced at a later date, but if anyone has one at hand, please do LMK. I need a handbrake switch (the plastic casing around mine has crumbled!) - I'll be temporarily 'fixing' the switch into place.
BTW, I'm also looking for a "Tailblazer" - either semi-tint or standard.. LMK again if anyone has a spare or wants to part with theirs!
Thanks again to all who've been actively sourcing the cables/clips
Fury D
----------------------------
Current: BX GTi 16V PhII - Grey [Gunmetal]
----------------------------
Current: BX GTi 16V PhII - Grey [Gunmetal]
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland