mi16/bx 16v Airflow meter wanted

Make requests for parts and cars here
Post Reply
User avatar
robin hughes
5000 rpm
Posts: 592
Joined: Mon Sep 04, 2006 5:08 pm
Location: st austell, cornwall

mi16/bx 16v Airflow meter wanted

Post by robin hughes »

Im in need of an airflow meter for my bx 16v has anyone got a known good one for sale as mines on its last legs. :(
The citroen bx 16 valve loves garages hates driving
1990 escort rs turbo 220 bhp
1992 bx 16 valve phase 2 red
Vanny
Web Support
Posts: 1570
Joined: Tue Jun 06, 2006 10:11 am
Location: BXProject
Contact:

Post by Vanny »

what makes you think its on its last legs?
User avatar
robin hughes
5000 rpm
Posts: 592
Joined: Mon Sep 04, 2006 5:08 pm
Location: st austell, cornwall

Post by robin hughes »

all the carbon tracking is worn, it has been cleaned to no effect. The car constantly runs rich causing kangarooing and poor fuel economy. The emissions are on the border line and will not come down no matter how much adjusted. Ive been told it will fail on me in damp weather. All other ignition system parts renewed.
The citroen bx 16 valve loves garages hates driving
1990 escort rs turbo 220 bhp
1992 bx 16 valve phase 2 red
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

hey robin, before you do that have you tried a replacement ecu? or tried testing it with another good one? all my old silver ph2 idle running probs were eventually discovered to be down to the ecu, i only found this out after i had already replaced the afm, icv, plugs, leads, coil etc etc etc they all cost me a fortune and none of them were at fault! i have a spare 3 row in my garage and after selling the black valver back i have no valver that runs a 3 row now.

rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
User avatar
robin hughes
5000 rpm
Posts: 592
Joined: Mon Sep 04, 2006 5:08 pm
Location: st austell, cornwall

Post by robin hughes »

its definatly the air flow meter, i have a spare ecu that i run on the car for over 6 months. Borrowed the air flow meter of the green 16v for an hour ( before we sold it ) and the car ran much better. The mot tester recently had a job to get it passed because the emissions just would not come down and it runs so rich it just kangaroos down the road when cold. :( . There were loads on ebay and now i want one i cant find one :roll: .
The citroen bx 16 valve loves garages hates driving
1990 escort rs turbo 220 bhp
1992 bx 16 valve phase 2 red
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

Rob, give darren a shout matey, he may have one in his stores!!
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
User avatar
robin hughes
5000 rpm
Posts: 592
Joined: Mon Sep 04, 2006 5:08 pm
Location: st austell, cornwall

Post by robin hughes »

unfortunatly he hasnt got one timmo :(

He was the one who took it for the mot and told me about the problem. As nanpean garage could not get the emissions down. I think both the garage and daren had a go at it!.
The citroen bx 16 valve loves garages hates driving
1990 escort rs turbo 220 bhp
1992 bx 16 valve phase 2 red
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

hey robin, there is a company down south that do reconditioned ones, thats where i got the replacement for my silver ph2, wasnt cheap though at £205 and i had to give them my old one which turned out to be in perfect working order! :evil: anyways tbh im not sure who they are but if you cant take the £205 hit then they are availible. maybe a google search would reveal them.

rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

also i just remembered, aren't they the same as ones on an alfa romeo?? pretty sure they are, maybe someone can confirm.

rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
User avatar
Toddman
Administrator
Posts: 1318
Joined: Mon Jun 26, 2006 9:02 pm
Location: Lincolnshire
Contact:

AFM

Post by Toddman »

Rob just retrack your old unit, you can download the details here - http://www.bx16valve.co.uk/Files/AFM_retrack_files.zip

Cheers
Luke
Please call me Luke :)
1989 BX 16valve White 70k almost up to scratch
Post Reply