i think ours is a little longer isnt it?? been a while since i've looked at one mind,
could be one of a 405 mi?? the airbox style on t hem is different to the bx's,
Timmo
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
cheers lads, the picture is from an ebay ad and it is listed as being for an Mi16. I couldn't really remember what the BX one should look like, mine is still split! Will have to glue it again i guess.
clean the sh*t out of it with degreaser then thinners, and use polyurethane-the black stuff you get in tubes for a caulking gun. basically set up the inlet in a prone state, and lock it solid somehow,couple of bits of wood either side, big vice etc. Have split facing up, and fill the split, then cover the entire area either side with a 2-3mm skin,as you need as much of a mechanical bond as poss-there will only be a small chemical one, due to the age of the old inlet.You can smooth the urethane down with a kerosene/turps filled brush. My 2 pence!
got an expensive K&N panel filter, which i rather like so shall stick with that for now. Will have a crack at repairing the hose. Cars off the road at the moment so there is no rush!