Hi everyone,
Just having a clearout of stuff, and this is the first lot:
http://www.bxclub.co.uk/forum/viewtopic ... 070#158070
Prices negotiable... Try me!
Big clearout (Pic heavy!)
-
- 3000 rpm
- Posts: 179
- Joined: Tue Dec 08, 2009 5:43 pm
- Location: middlesbrough
Hi Kitch,
- I've got a pair of rear door cards you can have
- The heater control panel is there, but I don't think the vents are in, or the PCB but I can check tonight (if it isn't raining). I also have the vents, but the little spring clips are missing.
- I might have a good steering wheel, but I think it is missing the self cancelling indicator peg on the back, although I need to check... It might be fitted in the white valver at the minute, but i'll be sticking the AX GT one in anyway.
- As for the 'Inner sh*t shield for NSF'... I'm not entirely sure what you mean. Care to elaborate?
As for the bumper it is made of plastic (although it is bloody heavy - Probably the same as a Phase 2 fibreglass one), and it would only really look good on a Mk1. A bit of a limited market for Mk1 BX tuning parts
Here's a pic of it slotted onto the front of my old car, not properly fitted or anything, as there are no brackets on the back, so you would have to make some of those up too
I'll send you a PM.
- I've got a pair of rear door cards you can have
- The heater control panel is there, but I don't think the vents are in, or the PCB but I can check tonight (if it isn't raining). I also have the vents, but the little spring clips are missing.
- I might have a good steering wheel, but I think it is missing the self cancelling indicator peg on the back, although I need to check... It might be fitted in the white valver at the minute, but i'll be sticking the AX GT one in anyway.
- As for the 'Inner sh*t shield for NSF'... I'm not entirely sure what you mean. Care to elaborate?
As for the bumper it is made of plastic (although it is bloody heavy - Probably the same as a Phase 2 fibreglass one), and it would only really look good on a Mk1. A bit of a limited market for Mk1 BX tuning parts
Here's a pic of it slotted onto the front of my old car, not properly fitted or anything, as there are no brackets on the back, so you would have to make some of those up too
I'll send you a PM.
Hi Matt
PCB is all I actually need, along with the clips that hold the cables down. The face and vents etc are all there.
Not fussed about the self cancelling bit of the steering wheel too much....they can be switched over anyway.
sh*t shield....not the full arch liner, just the plastic panel that covers the end of the gearbox when viewed from inside the wheel arch.
Forgot one.....mirror switch, do you have a spare? I've already had one go, then found another which also doesn't work!
Let me know what you want for em etc
Cheers
PCB is all I actually need, along with the clips that hold the cables down. The face and vents etc are all there.
Not fussed about the self cancelling bit of the steering wheel too much....they can be switched over anyway.
sh*t shield....not the full arch liner, just the plastic panel that covers the end of the gearbox when viewed from inside the wheel arch.
Forgot one.....mirror switch, do you have a spare? I've already had one go, then found another which also doesn't work!
Let me know what you want for em etc
Cheers