Hi Guys,
Does anyone know how this is done? My father mentioned Alan S had done a write up on it on the Aussiefrogs forum, but this must have been lost in the crash.
I'm wondering how I go about tightening up the chains? that pull that metal bars down to keep the seat fabric tightly down into the grove of the base of the Valver buckets. I notice on the underside there seem to be plastic anchors in the foam that correlate to the position of the ends of the bar.
Cheers,
Chris.
Seat Fabric - How do I tightening up the fabric on the base.
I've recently had a seat completely to bits to wash the fabric and it's rather straight forward. You can however only take up so much slack, unfortunately it isn't the fabric that is at fault, but the foam inserts. There are companies that will make up new foam parts, but i've not found any realistic prices yet!
Sorry chaps never got around to the photos but I've had 3 apart now and all through the wash, it's fairly straight forward. Vanny posted some photos on the various forums for future reference:
http://www.bxproject.co.uk/phpbb3/viewt ... f=2&t=3818
http://www.bxclub.co.uk/forum/viewtopic.php?f=2&t=16435
http://www.bxproject.co.uk/phpbb3/viewt ... f=2&t=3818
http://www.bxclub.co.uk/forum/viewtopic.php?f=2&t=16435