Hello all, Any one out there got the top heater matrix
hose for my valver.
Happy new year to you all.
bx16v top heater matrix hose
Re: bx16v top heater matrix hose
Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?
Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2
These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers
Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2
These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers
Re: bx16v top heater matrix hose
Have you considered a generic flexible hose such as these
http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html
I use hose world a lot through work so can recommend them
http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html
I use hose world a lot through work so can recommend them
-
- Tick Over
- Posts: 10
- Joined: Wed Dec 31, 2014 12:57 am
Re: bx16v top heater matrix hose
Hello Vanny, Reason at the moment not buying from bakersVanny wrote:Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?
Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2
These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers
I have a lot of jobs to get done on my valver owing
to the fact the garage who was looking after my car
did not do some work correctly , this came to my attention
when I took my car to main Citroen garage,
so at this time I'm hoping to get a used
top matrix , if I had no other jobs to be done
would go to Baker .
( Will give it a month if nothing turns up
will have to rethink .)
Thanks for your help on this.
Last edited by greendale65 on Sat Jan 03, 2015 11:01 am, edited 1 time in total.
-
- Tick Over
- Posts: 10
- Joined: Wed Dec 31, 2014 12:57 am
Re: bx16v top heater matrix hose
Hello again, Would you know the diameter on these matrix hoses.Vanny wrote:Have you considered a generic flexible hose such as these
http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html
I use hose world a lot through work so can recommend them
Thanks Alan
Re: bx16v top heater matrix hose
Service Citroen lists the upper hose as
HEATER WATER HOSE
DIAM 19,2X27,4
So I would guess 19.2mm id and 27.4mm OD.
And the lower hose as
HEATER WATER HOSE
DIAM INT 20 ET 22
HEATER WATER HOSE
DIAM 19,2X27,4
So I would guess 19.2mm id and 27.4mm OD.
And the lower hose as
HEATER WATER HOSE
DIAM INT 20 ET 22
-
- Tick Over
- Posts: 10
- Joined: Wed Dec 31, 2014 12:57 am
Re: bx16v top heater matrix hose
Thanks will give it a go.Vanny wrote:Service Citroen lists the upper hose as
HEATER WATER HOSE
DIAM 19,2X27,4
So I would guess 19.2mm id and 27.4mm OD.
And the lower hose as
HEATER WATER HOSE
DIAM INT 20 ET 22