16v bits wanted
16v bits wanted
Hi, all finally got my hands on a 16 valve so I’m now gonna be a pain in the arse and probably ask loads of stuff. But firstly I’m after a n/s/f fog light and the bx 16 valve badge for the boot. I’m sure there’s loads floating about
Re: 16v bits wanted
Of the two, fog lights appear the easier to get and not that costly. Further down the page is the driving light as seen on 309's etc.
https://www.bowerspartsonline.co.uk/lig ... 09-405-gti
Welcome to the club.
https://www.bowerspartsonline.co.uk/lig ... 09-405-gti
Welcome to the club.
Prefer it to the Lamborghini, like Signor Gandini!
Re: 16v bits wanted
Cheers Dave . I’ve ordered 1 it looks ok.
Re: 16v bits wanted
Pleased to have helped. Hopefully will be fine, let us know.
Prefer it to the Lamborghini, like Signor Gandini!
Re: 16v bits wanted
Hiya Dave , fog light looks good for the money, good close match.
Re: 16v bits wanted
Perfect, they are more for looks really because as a fog light, they are not that great. They are also quite prone to cracking if hit by a chipping. I bought some Peugeot covers that seemed to solve the issue when the car was in regular use.
I have been looking for the 16v emblem on various sites but no luck, I have only seen stickers.
I have been looking for the 16v emblem on various sites but no luck, I have only seen stickers.
Prefer it to the Lamborghini, like Signor Gandini!
Re: 16v bits wanted
Yeah the glass isn’t so strong, I’ve wrapped them with yellow vinyl which should help abit. I’ve seen the stickers but I’d rather wait.
Re: 16v bits wanted
Why not 3D print one?
Re: 16v bits wanted
I wouldn’t know where to start
Re: 16v bits wanted
Where are you based/where goes it need to get to?
I think I have one on a toolbox in the garage, it's in surprisingly good condition, but the white/silver lettering is very faded.
I think I have one on a toolbox in the garage, it's in surprisingly good condition, but the white/silver lettering is very faded.
Re: 16v bits wanted
You can touch up the lettering with a Molotow chrome pen and seal it with spray on acrylic varnish. Example below, see the pictures on the page.
https://www.amazon.co.uk/Molotow-Liquid ... B01E7EG3NM
https://www.amazon.co.uk/Molotow-Liquid ... B01E7EG3NM
Prefer it to the Lamborghini, like Signor Gandini!
Re: 16v bits wanted
Hi vanny, you got the bx16 valve tailgate badge?
Re: 16v bits wanted
Yes, found one in my desk drawer of all places
Re: 16v bits wanted
Oh coooooooooool will pm you
Re: 16v bits wanted
Thx Dave