Front Brakes
Front Brakes
Can anyone help with where I can get the springs that hold in the front pads?
After being under the car yesterday,I found two are missing on the right side.
Also,does all 16v's have pad wear sensors? Mine hasnt got them neither has Iain a's.I cant see any wiring going to the wheels either.
I had a 16v a few years ago,and that had them and so had Iain's old red one,??????????????
thanks
After being under the car yesterday,I found two are missing on the right side.
Also,does all 16v's have pad wear sensors? Mine hasnt got them neither has Iain a's.I cant see any wiring going to the wheels either.
I had a 16v a few years ago,and that had them and so had Iain's old red one,??????????????
thanks
- Timmo
- Full Throttle
- Posts: 2233
- Joined: Tue Jun 27, 2006 3:30 pm
- Location: Cornwall! Tis where they make Oggy's!
- Contact:
Halfords used to do a fitting kit for the brakes! iirc they are the same as the 309/205 1.9 8v gti rears and the 1.6 fronts??? (retaining clips wise! - the pack i had i got for my 309 as they are a swine to remove if they havent been copper greased up! lol)
Timmo
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
The springs don't hold tghe pads in the pins do taht, they stp them rattling! ( so long a stheyre not fitted by a Kwik fit clown) If you cant get a listing for the bX try 205 or 306, some models use similar pad shapes, any dcent motor fctors will have some.
wear sensors are an interesting point, the wiring comes down from the are where theb ABS sensors come through and is routed along the Handbrake cable area and one is earthed to the front stru by the cable suppor.
I don't fit them to mine cos they either don't work cos if dust! as if? and / or the wiring pulled out cos it got snagged on something! what a car design with rotating moving bits in the wheel arch?
Sorry tio be so cynical but the work and care required to fit the woring prpoerly was beyond citroen ,and not worth it! cos you shoukld be checking wheels off at service time anyway and getting a good feel for wear levels long before a sensor is required!
wear sensors are an interesting point, the wiring comes down from the are where theb ABS sensors come through and is routed along the Handbrake cable area and one is earthed to the front stru by the cable suppor.
I don't fit them to mine cos they either don't work cos if dust! as if? and / or the wiring pulled out cos it got snagged on something! what a car design with rotating moving bits in the wheel arch?
Sorry tio be so cynical but the work and care required to fit the woring prpoerly was beyond citroen ,and not worth it! cos you shoukld be checking wheels off at service time anyway and getting a good feel for wear levels long before a sensor is required!
looms
cossie
The wear indicator is a plug in loom one on each side they run from the actual pads through the inner arch/wing and then plug into the main loom.
You can still buy these plug in looms although theh abs ones are different to the std ones.
I have a couple of new drivers side ones here that I can take a picture of if you like.
Cheers
Luke
The wear indicator is a plug in loom one on each side they run from the actual pads through the inner arch/wing and then plug into the main loom.
You can still buy these plug in looms although theh abs ones are different to the std ones.
I have a couple of new drivers side ones here that I can take a picture of if you like.
Cheers
Luke
Last edited by Toddman on Thu Aug 17, 2006 10:14 am, edited 1 time in total.
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
pic
Will sort it later today
Cheers
Luke
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
pad loom
cossie here you are
This one is for the drivers side and I have 2 brand new unused ones if you need some.
The difference between drivers and passengers is that the yellow plug is female in the drivers and male on the passengers - I managed to pick up 4 female plugged ones some time back
Hope that helps
Cheers
Luke
This one is for the drivers side and I have 2 brand new unused ones if you need some.
The difference between drivers and passengers is that the yellow plug is female in the drivers and male on the passengers - I managed to pick up 4 female plugged ones some time back
Hope that helps
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch