For sale soon!
- robin hughes
- 5000 rpm
- Posts: 592
- Joined: Mon Sep 04, 2006 5:08 pm
- Location: st austell, cornwall
Hmm, that gets me thinking. Both sets of Beemer 7 series headlights anybody? Have the backings and the plastic covers too I think. BMW price is something like £250 per side plus VAT!
Recovery, delivery/collection and scrap and unwanted vehicles collected West Cheshire area. Cash paid for most abandoned, unwanted and scrap vehicles if local, anything considered.
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland
what are they? whats the difference? and how do i identify them? are they just newer model+year beamer ones or which? im sure i could mate them to modified bx lights with the glass fronts removed, mounted evenly then filled in between.Timmo wrote: rossco, make sure you source the projecter lights though!
rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection
1990 BX 16v ph2 (now scrapped)
1990 BX 16v ph2 (now scrapped)
- Timmo
- Full Throttle
- Posts: 2233
- Joined: Tue Jun 27, 2006 3:30 pm
- Location: Cornwall! Tis where they make Oggy's!
- Contact:
when you look at the units one will be the normal spolamp unit as you get with the quads, the other will have a round dome in the middle of it different to the normal h4 style unit! they are called projecter lamps! they have a better light and a wider field of vision to the std's! would be no point in doing it with normal bulbs!!
Timmo
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
- Jezziebx16v
- Moderator
- Posts: 571
- Joined: Tue Jun 27, 2006 3:13 pm
- Location: Alberta, Canada
Hi Jez, replied on BXClub mate but just in case I`ll try and dig out a pic and post it up mate. If I can`t find one I`ll take some tomorrow and post up or pm to you. Hope this helps, cheers for now.
Recovery, delivery/collection and scrap and unwanted vehicles collected West Cheshire area. Cash paid for most abandoned, unwanted and scrap vehicles if local, anything considered.
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland
cavmad sorry for robbing your thread, will try not to keep it going.
TIMMO from the picture below which ones are the projector ones.?? the ones on the outside or the ones on the inside??
[quote="cavmad"
[/quote]
cheers rossco
TIMMO from the picture below which ones are the projector ones.?? the ones on the outside or the ones on the inside??
[quote="cavmad"
[/quote]
cheers rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection
1990 BX 16v ph2 (now scrapped)
1990 BX 16v ph2 (now scrapped)
- robin hughes
- 5000 rpm
- Posts: 592
- Joined: Mon Sep 04, 2006 5:08 pm
- Location: st austell, cornwall
quads
You can buy all the individual parts for the Morettes so a good route is to buy the shwells then grab some 2nd hand BMW lemses saving a lot of money and effort.thanuttiscotsman wrote:hi there,
i might do one of my rossco specials and try making some from the many bmw's in my locak scrappers.
rossco
£150 is an honest price fopr a good set they are just over £250 new
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland
cheers robin!,robin hughes wrote:outside are projector lamps inside ones are for main beam rosco
will collect some tomo!! luke i agree its not expensive at 150 quid but i love the whole fabricating and trying to build stuff. im usually sucessfull!! i also save myself money i could use on other stuff. like your k+n it cost me 6 quid or something to build an adaptor that works fine. but if i could buy the casing and just fit bmw lights to them that might be an idea depending on how much the casings are?? will consider anything!! feed me info please!!
cheers rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection
1990 BX 16v ph2 (now scrapped)
1990 BX 16v ph2 (now scrapped)
quads
What the hell are "projector lights"?
Morette quads are just std lamps - the outer lamps have side lamp and high/low beam the inner pair are just spots for high beam use.
You can download the datasheet from th emainsite
Cheers
Luke
Morette quads are just std lamps - the outer lamps have side lamp and high/low beam the inner pair are just spots for high beam use.
You can download the datasheet from th emainsite
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland