Oh dear!

All chat, general/off topic/banterish and questions relating to the BX16valve.
Post Reply
tim leech
7000 rpm
Posts: 1187
Joined: Sun Aug 06, 2006 9:25 pm
Location: derbyshire

Oh dear!

Post by tim leech »

Im not having a good week, it seems everything with chevrons on that i go near breaks, as may you know the Xantia threw her toys out of the pram friday night and is sulking at work, and tonight Mr Favell (tim2cv)and I had a lads night in ( cup of tea at his and a natter about all things citroen), he has the bug worse than me! Like a fool he very kindly let me have a drive in his 16v as a comparison to mine, whichs drives a treat and is very diiferent to mine, mines faster but his seems "tighter" to drive, my steering feels sloppy now.

Guess what, yep I broke that too :oops: , its burst a pipe and has dumped its LHM! Sorry tim :oops:

We have a saxo taken in part ex at work, lets see if I can make it a hat-trick when I have to shift that tomorrow, its a AUTO so no doubt that will go pop.
AlanS
3000 rpm
Posts: 233
Joined: Wed Aug 09, 2006 6:23 pm
Location: Australia

Post by AlanS »

Looks like your the victim of what we refer to out here as "The Citroen Eye" where everything you look at with the double chevs on it turns to a brown substance rather than a green liquid one (although the green blood usually gets into the act somewhere along the way) and just as you're about to give up on all things Cit again, you take something else for a drive, sit and think about why you had all the evil thoughts and plough on until the next "look" from "The EYE" :shock: :shock: :twisted:


Alan S :wink:
User avatar
Tim2cv
3000 rpm
Posts: 117
Joined: Tue Aug 08, 2006 5:38 pm
Location: DERBY

Post by Tim2cv »

small leak (pictures taken last night!

Image

From the are near the centre of the car? odd?

Image

Whats it likely to be?

Cheers

TIM
2CV6 1986
AKS 400 Super ;o) 1300cc!
Ami 8 1971
Xantia Exclusive credit crunch 2.0
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

hi tim,
odds are it will be a pressure pipe as the drip line was pretty rapid looking. prolly suspension pipe as brakes dont leak too bad normally till you use the brakes.\

cheers rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
tim leech
7000 rpm
Posts: 1187
Joined: Sun Aug 06, 2006 9:25 pm
Location: derbyshire

Post by tim leech »

:oops: Car drove fine and the warning lights didnt come one though?
User avatar
RobC
3000 rpm
Posts: 221
Joined: Mon Aug 07, 2006 11:52 am
Location: East London

Post by RobC »

If it was a high pressure leak then car would most certainly not have driven fine.

It looks like a hefty return pipe leak. Remember the rear brakes are linked to the rear suspension so there's always a certain amount of flow at the back, even on the return lines.
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

i would have thought it was a low pressure return pipe that runs along the subframe! i had one go there and fire all its fluid out from the middle of the subframe!
may be able to cut the end and re attatch it if your lucky!!!
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

hi tim,
just remember to replace it with a copper one this time and it wont blow again.!! i do all my metal pipes with copper when they burst. :D 8)

cheers rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
User avatar
Tim2cv
3000 rpm
Posts: 117
Joined: Tue Aug 08, 2006 5:38 pm
Location: DERBY

Post by Tim2cv »

Moved the car, went up fine and nly really leaked when on high after a few minutes. Stil no warning light. Think it looks worse than it is! lol!
It's looking like a front to rear pipe. passenger side infront of or above the fuel tank (which i took out only a month ago or so! agh)

excuse the poor picture etc.. ignore the hole in the floor and the black thing is the fuel tank.

Image

Will decide what to do once i can be sure what exactly is leaking...
At least it didnt give way when we were out right footing it!

And after the car was going well too! ish!

NEWNESS!

Image

TIM
2CV6 1986
AKS 400 Super ;o) 1300cc!
Ami 8 1971
Xantia Exclusive credit crunch 2.0
tim leech
7000 rpm
Posts: 1187
Joined: Sun Aug 06, 2006 9:25 pm
Location: derbyshire

Post by tim leech »

Nice seats mothy, just dont let me in the drivers one again :shock:
Last edited by tim leech on Thu Nov 16, 2006 6:31 pm, edited 1 time in total.
User avatar
Tim2cv
3000 rpm
Posts: 117
Joined: Tue Aug 08, 2006 5:38 pm
Location: DERBY

Post by Tim2cv »

eh? What you on about?

BX now parked on the garden awaiting the next bout of TLC.

TIM
2CV6 1986
AKS 400 Super ;o) 1300cc!
Ami 8 1971
Xantia Exclusive credit crunch 2.0
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

hhmmm that would be a pressure pipe then :twisted:
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
tim leech
7000 rpm
Posts: 1187
Joined: Sun Aug 06, 2006 9:25 pm
Location: derbyshire

Post by tim leech »

mothy (as in timothy) nick name of mine from a mate, :D
Post Reply