Little bits

jayw · Post by **jayw** » Tue Jan 02, 2007 10:46 pm

Need BE3 Clutch Bearing (the plastic one)

And a shaft sleeve (think they're the same on both BE1 & BE3), that's the metal sleeve that goes over the input shaft and has a triangle base bolted to the bell-housing with 3x 10mm bolts IIRC.

Please PM if anyone's got.

Cheers! Jay.

jayw · Post by **jayw** » Thu Jan 04, 2007 3:05 pm

Bump!

Post by **Vanny** » Thu Jan 04, 2007 5:49 pm

if there the same then i presume any BE1 or BE3 gearbox would be a donor?

jayw · Post by **jayw** » Thu Jan 04, 2007 6:26 pm

The sleeve is the same but i have niether spare box to take it off.

I'd buy a new bearing, but can't find anywhere to sell one seperate from the clutch. GSF listed it but when i bought it online they rang me to say it was n/a.

Hoping someone's got a spare kicking around.

Gary C · Post by **Gary C** » Thu Jan 04, 2007 7:31 pm

I have a bitsa box which probably has a sleeve etc. Check it out in the morning.

Gary C · Post by **Gary C** » Sat Jan 06, 2007 7:43 pm

Have a Valeo bearing. Both spare boxes have a triangular plate.

Gary C · Post by **Gary C** » Mon Jan 15, 2007 7:27 pm

Do you still want these parts?

jayw · Post by **jayw** » Mon Jan 15, 2007 9:20 pm

Yes please, did PM you a while back.

BX16V.com Forum

BX16V.com Forum

Little bits

Little bits