...looking for an exhaust for my bx.... stainless if possible..
PS does it come in 4 parts? had a quote for a new system and they said its a 4 part system....
exhaust
- Jezziebx16v
- Moderator
- Posts: 571
- Joined: Tue Jun 27, 2006 3:13 pm
- Location: Alberta, Canada
4 parts sounds right, down,inter,cross and back box. Last time I bought a whole system it was *about* £250 from kwik fit, sure a full powerflow won't be much more than that if any !
Jez
Jez
Past 16v's: 89 Ph1 Black, 90 Ph2 Grey, 89 Ph2 Black, 91 Ph2 Grey, 91 Ph2 Black.
Now. 94 Datsun Silvia S14 rice rocket, 85 Peugeot 505 Turbo, 77 Ford Capri.
Now. 94 Datsun Silvia S14 rice rocket, 85 Peugeot 505 Turbo, 77 Ford Capri.
exhaust
Be sure to check that the replacement system includes the downpipe and that the downpipe is the correct siamesed item for the 16v.
Even if you go for a ss system they tend to use the standard mild steel downpipe as the "split" downpipe is essential to get good low rpm torque on these motors.
Generally a 2 box system is regarded as the best route - basically use the correct std downpipe and mate that to ss running straight through to the cross box and tail box.
Cheers
Luke
Even if you go for a ss system they tend to use the standard mild steel downpipe as the "split" downpipe is essential to get good low rpm torque on these motors.
Generally a 2 box system is regarded as the best route - basically use the correct std downpipe and mate that to ss running straight through to the cross box and tail box.
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch