Page 1 of 1
exhaust
Posted: Sat Sep 29, 2007 8:45 am
by iain a
...looking for an exhaust for my bx.... stainless if possible..
PS does it come in 4 parts? had a quote for a new system and they said its a 4 part system....
Posted: Sat Sep 29, 2007 12:01 pm
by Jezziebx16v
4 parts sounds right, down,inter,cross and back box. Last time I bought a whole system it was *about* £250 from kwik fit, sure a full powerflow won't be much more than that if any !
Jez
Posted: Sun Sep 30, 2007 12:48 am
by iain a
cheers...got a quote for £170 for whole system... not stainless though
exhaust
Posted: Tue Oct 09, 2007 1:52 pm
by Toddman
Be sure to check that the replacement system includes the downpipe and that the downpipe is the correct siamesed item for the 16v.
Even if you go for a ss system they tend to use the standard mild steel downpipe as the "split" downpipe is essential to get good low rpm torque on these motors.
Generally a 2 box system is regarded as the best route - basically use the correct std downpipe and mate that to ss running straight through to the cross box and tail box.
Cheers
Luke
Posted: Thu Oct 11, 2007 10:53 pm
by iain a
cheers
