can someone help me out here! dont have one to hand with the bits to check, is it a 10mm/posidrive nut?? i can vividly remember how much of a pita the lower one is to get to! but cant remember the size!! and dont want to take the whole tool box up to pops lol!
Ta in advance!
tools req'd for dizzy cap removal??
- Timmo
- Full Throttle
- Posts: 2233
- Joined: Tue Jun 27, 2006 3:30 pm
- Location: Cornwall! Tis where they make Oggy's!
- Contact:
tools req'd for dizzy cap removal??
Timmo
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland
hey timmo i was at this fairly recently! pretty sure i used a std 10mm spanner for the top 2 and a small 1/4 drive ratchet with ext +10mm seems to just fit past pipes wires etc for the bottom one. would recommend using something magnetic when taking last one out as i almost always drop it! lol
rossco
rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection
1990 BX 16v ph2 (now scrapped)
1990 BX 16v ph2 (now scrapped)
- Timmo
- Full Throttle
- Posts: 2233
- Joined: Tue Jun 27, 2006 3:30 pm
- Location: Cornwall! Tis where they make Oggy's!
- Contact:
cheers matey! yeah will have the magnetic tray under it!!
dropped the filler cap for the water bottle on saturday and as the cars low down i couldnt get the b#gger out hahah! fishing with bits of wood in the end!! lesson learnt there time and again hahah!
dropped the filler cap for the water bottle on saturday and as the cars low down i couldnt get the b#gger out hahah! fishing with bits of wood in the end!! lesson learnt there time and again hahah!
Timmo
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
After all i am the Cornish one!
Its Because its French!
Bx16v club - Sharing the love for the unloved!
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland
cap
Yup! 10mm hex bolts and a 1/4 drive deep socket will whip all three out in a jiffy.
Cheers
Luke
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch