Page 2 of 2
Posted: Wed Jul 29, 2009 11:25 am
by Simran
It really isnt that difficult, connect the pipes in the right order and its easy peasy. two plastic pipes that go left across the car first, push the molded block across the subframe towards the rear and connect the two rearward facing plastic pipes, then feed the three up that go to the reservoir then run the one across the subframe to the suspension leg and do the last 2/3 small ones around the right hand side and bobs your uncle.
Posted: Wed Jul 29, 2009 12:13 pm
by Vanny
what about the other one? that description sounds like only the big octopus, but there is another smaller one as well. Usually comes as a set at GSF
Posted: Wed Jul 29, 2009 2:55 pm
by Simran
Where does the smaller one go? Only thought there was one, we only got one in the bag from citroen.
Posted: Thu Jul 30, 2009 5:09 am
by surjit25
There are 2 sets which should be replaced together.
One is power steering return/didvider flow and the other suspension return(octopus).
It is not easy to replace unless you have dainty small hands,
large hands can barely go in there, have a pair of long nose pliers ready.