16V Phase 2 parts (with prices)
16V Phase 2 parts (with prices)
Here is a list of some of the spares; (note, some of the items I have 2 of (x2))
Engine block with recent re-hone of bores+rings, recent big-end shells. £50
Complete cylinder head. £45 (x2)
Inlet manifold with fuel rail/throttle body/coil. £30
Another throttle body. £10 - SOLD
Exhaust manifold. £10 (x2) - SOLD
Set of hardley used hydraulic tappits. £15 - SOLD
Gearbox. £60 - SOLD
Le Manns velour interior, f/r seats + door cards. £80
Bonnet. £25 - SOLD
Tailgate. £35
Four mint doors. £60
Front wings, light scratches. £30 (pair)
Front wings good. £45 (pair) - SOLD
Front bumper. £75 - SOLD
Rear bumper. £75 - SOLD
Rear bumper, small crack on 1 corner £50
Front leather head-rests. £20 (pair) - SOLD
Rear leather seats. £30
Engine management with BBR de-limited chip. £30
Drive shafts. £25 (pair)
Front brake calipers. £25 (pair) - SOLD
Rear brake calipers. £10 (pair)
Front suspension struts. £40 (pair)
HP pump. £15 - SOLD
Flow valves. £10
Power steering rack/ram. £25
Brake valve. £10
Rear swing arms with good bearings. Complete with hubs. £30 (pair) - SOLD
Front hubs. £20 (pair)
Wishbones. £20 (pair)
Track rod ends/ball joint. £10 (pair)
Dash with vents/trays etc. £20 - SOLD
Glove box. £10 - SOLD
Regards
Mark
Engine block with recent re-hone of bores+rings, recent big-end shells. £50
Complete cylinder head. £45 (x2)
Inlet manifold with fuel rail/throttle body/coil. £30
Another throttle body. £10 - SOLD
Exhaust manifold. £10 (x2) - SOLD
Set of hardley used hydraulic tappits. £15 - SOLD
Gearbox. £60 - SOLD
Le Manns velour interior, f/r seats + door cards. £80
Bonnet. £25 - SOLD
Tailgate. £35
Four mint doors. £60
Front wings, light scratches. £30 (pair)
Front wings good. £45 (pair) - SOLD
Front bumper. £75 - SOLD
Rear bumper. £75 - SOLD
Rear bumper, small crack on 1 corner £50
Front leather head-rests. £20 (pair) - SOLD
Rear leather seats. £30
Engine management with BBR de-limited chip. £30
Drive shafts. £25 (pair)
Front brake calipers. £25 (pair) - SOLD
Rear brake calipers. £10 (pair)
Front suspension struts. £40 (pair)
HP pump. £15 - SOLD
Flow valves. £10
Power steering rack/ram. £25
Brake valve. £10
Rear swing arms with good bearings. Complete with hubs. £30 (pair) - SOLD
Front hubs. £20 (pair)
Wishbones. £20 (pair)
Track rod ends/ball joint. £10 (pair)
Dash with vents/trays etc. £20 - SOLD
Glove box. £10 - SOLD
Regards
Mark
Last edited by Himbo on Fri Apr 16, 2010 7:15 pm, edited 9 times in total.
Re: 16V Phase 2 parts (with prices)
Hi mate hows it going? Does this come with the loom and sensors?Himbo wrote:Engine management with BBR de-limited chip. £30
Cheers, Big Red
To the BXTREME
Hi Oldred
No it's just the Bosch ECU.
I've had a quick look and I do have the loom with the round connector that supplies the injectors/aux air valve. Also I have the loom with the rectangular white connectors that supply the temp sensors.
Sensor wise I have an air flow meter. I should have the power amp somewhere for the ignition plus the loom for that.
Let me know what you are after and we'll sort a price?
Mark.
No it's just the Bosch ECU.
I've had a quick look and I do have the loom with the round connector that supplies the injectors/aux air valve. Also I have the loom with the rectangular white connectors that supply the temp sensors.
Sensor wise I have an air flow meter. I should have the power amp somewhere for the ignition plus the loom for that.
Let me know what you are after and we'll sort a price?
Mark.
parts
PM sent
Put me down for the HP pump and an exhaust manifold.
Thanks
Luke
Put me down for the HP pump and an exhaust manifold.
Thanks
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
-
- 3000 rpm
- Posts: 176
- Joined: Tue Dec 19, 2006 3:18 pm
- Location: Roermond, The Netherlands
- Contact:
Hi Mark,
I'm very interested in the headrests, I'll leave the cilinderhead for what it is for now, maybe next month if it's still available.
Do you have a Paypal account or shall I use a bank2bank transfer?
PM me the details and I'll send you the 38 GBP.
Cheers,
Tonie
I'm very interested in the headrests, I'll leave the cilinderhead for what it is for now, maybe next month if it's still available.
Do you have a Paypal account or shall I use a bank2bank transfer?
PM me the details and I'll send you the 38 GBP.
Cheers,
Tonie
You can't spell slaughter without laughter ->I just love my 16V<-
Hi Himbo... is the round loom for BX16 valve... i need it for my 16valve project... but will you ship it to Indonesia? do you have paypal account for the payment?
cheers
Faisal
cheers
Faisal
Himbo wrote:Hi Oldred
No it's just the Bosch ECU.
I've had a quick look and I do have the loom with the round connector that supplies the injectors/aux air valve. Also I have the loom with the rectangular white connectors that supply the temp sensors.
Sensor wise I have an air flow meter. I should have the power amp somewhere for the ignition plus the loom for that.
Let me know what you are after and we'll sort a price?
Mark.
hello,
I want the 2 front seats, but I lived in Taiwan...
how much if send to here?
Thank you...
and Could I look the picture of front seat?
my E-mail is eric234kimo@hotmail.com
Thank you very much...
I want the 2 front seats, but I lived in Taiwan...
how much if send to here?
Thank you...
and Could I look the picture of front seat?
my E-mail is eric234kimo@hotmail.com
Thank you very much...
I like Citroen so much.Now I have a BX TZi and BX 19 GTi...and had convertted TZi to GTi 16V... It's wonderful !
-
- Posts: 4
- Joined: Sun Mar 29, 2009 12:08 pm
- Location: QLD Australia
-
- Posts: 4
- Joined: Sun Mar 29, 2009 12:08 pm
- Location: QLD Australia
Yeah, thanx.NZ16v wrote:OI ozzie, 16vs came out with ONLY black dash, no exceptions on that one,despite all the engine/trim/bodywork changes over the years!
New that was the case here, wasn't sure about the rest of the world. esp as I have seen different trim combinations overseas.
Back on subject, all I really need is the demister vent panel, should be light enough but a bit baulky. If freight isn't too much I am keen to get one.
Cheers,
Bernie