Odds and sods needed
Odds and sods needed
Hi everyone
After spending some time working on the silver valver, which is going to be a bit of a show car, I have found myself or rathe it in need of several trim parts, namely -
Glovebox with retaining screws
Upper or top half of the steering column shroud
Both plastic covers that run along the box section that the front seats bolt onto
Drivers seat (striped) bottom removeable part condition not important
Rear mudflaps
O.E. tailbox or just the trim piece.
Passenger side heater ducting that runs from LHS vent behind glovebox
Cheers
Luke
After spending some time working on the silver valver, which is going to be a bit of a show car, I have found myself or rathe it in need of several trim parts, namely -
Glovebox with retaining screws
Upper or top half of the steering column shroud
Both plastic covers that run along the box section that the front seats bolt onto
Drivers seat (striped) bottom removeable part condition not important
Rear mudflaps
O.E. tailbox or just the trim piece.
Passenger side heater ducting that runs from LHS vent behind glovebox
Cheers
Luke
Last edited by Toddman on Tue Apr 20, 2010 11:10 am, edited 1 time in total.
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
bits
Thanks Vanny erm?.... I have the one I have taken out didn't really examine it but the ends of it are in aterrible state, someone removed it when fitting the alarm which I have spent two days removing and there are holes drilled all over hence my need for trim parts.Vanny wrote:i should have the vent ducting, do you want it with or without noise reduction inserts
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
That would be great Jay thanks - let me know when you have checked and I will sort out the logistics.jayw wrote:I've got a genuine OE tailbox complete with original black oval pipe.
Will check on condition at the weekend Luke.
Possibly also have glovebox but will need to check.
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
bits
Aha I understand now
Good news is I have been ringing round my local scrappys and just got the heads up on a J plate dark silver diesel arriving late next week so I have asked for first dibs on the trim parts I need.
Thanks
Luke
Good news is I have been ringing round my local scrappys and just got the heads up on a J plate dark silver diesel arriving late next week so I have asked for first dibs on the trim parts I need.
Thanks
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
pipe
Thanks for checking Jay i will keep searchingjayw wrote:Checked for the tailbox today and the seam is split to buggery and it's not the oval tailpipe i thought it was. Sorry.
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch
The gen O.E. box has a black oval tailpipe which exits at the correct angle. I imagine getting hold of an original would cost a fair few quid!tim leech wrote:What do the rear boxes fetch, I take it these are the walker ones with the oval chrome rear finisher.
I've got one on my valver that i bought about 3 years ago on fleabay but i'm keeping that one!
Now listen here you mullet...
I though it was a chrome one, damn lol!jayw wrote:The gen O.E. box has a black oval tailpipe which exits at the correct angle. I imagine getting hold of an original would cost a fair few quid!tim leech wrote:What do the rear boxes fetch, I take it these are the walker ones with the oval chrome rear finisher.
I've got one on my valver that i bought about 3 years ago on fleabay but i'm keeping that one!