BX16V.com Forum

Been on the lookout for some 15" alloys to fit the 16v Zx , they must be of the period , ie , 1990's style and not modern bling bling stuff , ideally a set of MiM would do as I previously had some on my volcane but as I said something that would have looked fairly factory fit , thanks , Mark

We've got a set of five Team Dynamics multispokes at work with 205/50/15 Yokohama tyres on. They'll fit a ZX but will need the plastic spigot rings for PSA cars (about £5 IIRC).

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... RK:MESE:IT

They came off a kit car, but the offset is a Peugeot one. Might look quite cool on a ZX and would upgrade the width at the same time. I reckon the boss might take an offer on them too.

Thanks for that kitch but I forgot to put in my post I was after some five spokes , I had some mim imolas on my volcane years ago and the style really suited the car , will try and get a pic up of it , thanks again

Mark

What about the mi16 wheels? They are cheap on ebay and look great in the ZX 16V

Those Mi16 wheels really work on the ZX (that back needs lowering though)! But for gods sake get some spacers made up to sort the offset out! One of the worst things about a ZX is the way the wheels are recessed so far inside the arch. Makes it look really puny on the move.

I'm liking the Mi16 wheels

Very subtle and period, plus they are common as chips.

Mike P

Must admit the mi16 wheels do look well , did also think about done saxo vts alloys but not sure on the size , I think there 15" as the vtr had 14"fitted ,there a sort of 5 spoke with the spokes swept back slightly if that sounds right ,

compomotives woukd look Great on the zx!!wont be cheap mind but woukd look great!!

These Rota attacks any use to you mate?

15x6.5"
195/45 15 tyres; 2x A539 2xA520 all good tread.
Pcd 4x108, et18 (I think, it might be 20)

They aren't mint but are very light:







£300 ovno

Thanks for the offer but their not what I'm after

Mark