Sell it? You must be kidding!
Posted: Tue Sep 20, 2011 10:10 pm
Hello people
Ive been putting my engine back to standard over the last week and finally completed it on Sunday. She started first time using old plugs, leads, cap, coil and rotor from when it used to be standard. I put 6 months tax on her straight away and went for a blast.... all i can say is, its good to be back
There is still the high idle speed problem i used to have before which i just cant figure out, the abs light is now on and the abs doesnt work, i still have the non-starting problem its always had which i am now putting down to a dodgy immobiliser which i am going to remove, but these are all small jobs which i am actually looking forward to tackling, i almost forgot just how simple and easy to work on the BX is. I even drove her to work on Monday and i couldnt stop looking at it in the car park, and neither could everyone else who walked past it
One thing i have noticed with the abs not working, is how grabby the xantia brakes set up is. Its too easy to lock the wheels, even in the dry and with the good tyres i have on. I would go as far as saying dont bother with this conversion if anyone has considered it. Its actually quite hard to modulate braking power. After driving a volvo 360 around for a year, with its heavy iron block hanging right in front of the front wheels, the light bx with no dive and minimal weight transfer is taking alot more thought to slow down without skidding
Ive been putting my engine back to standard over the last week and finally completed it on Sunday. She started first time using old plugs, leads, cap, coil and rotor from when it used to be standard. I put 6 months tax on her straight away and went for a blast.... all i can say is, its good to be back
There is still the high idle speed problem i used to have before which i just cant figure out, the abs light is now on and the abs doesnt work, i still have the non-starting problem its always had which i am now putting down to a dodgy immobiliser which i am going to remove, but these are all small jobs which i am actually looking forward to tackling, i almost forgot just how simple and easy to work on the BX is. I even drove her to work on Monday and i couldnt stop looking at it in the car park, and neither could everyone else who walked past it
One thing i have noticed with the abs not working, is how grabby the xantia brakes set up is. Its too easy to lock the wheels, even in the dry and with the good tyres i have on. I would go as far as saying dont bother with this conversion if anyone has considered it. Its actually quite hard to modulate braking power. After driving a volvo 360 around for a year, with its heavy iron block hanging right in front of the front wheels, the light bx with no dive and minimal weight transfer is taking alot more thought to slow down without skidding