Page 1 of 1
bx16v top heater matrix hose
Posted: Wed Dec 31, 2014 5:24 pm
by greendale65
Hello all, Any one out there got the top heater matrix
hose for my valver.
Happy new year to you all.
Re: bx16v top heater matrix hose
Posted: Thu Jan 01, 2015 11:00 pm
by Vanny
Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?
Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2
These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers
Re: bx16v top heater matrix hose
Posted: Thu Jan 01, 2015 11:17 pm
by Vanny
Have you considered a generic flexible hose such as these
http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html
I use hose world a lot through work so can recommend them
Re: bx16v top heater matrix hose
Posted: Sat Jan 03, 2015 10:49 am
by greendale65
Vanny wrote:Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?
Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2
These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers
Hello Vanny, Reason at the moment not buying from bakers
I have a lot of jobs to get done on my valver owing
to the fact the garage who was looking after my car
did not do some work correctly , this came to my attention
when I took my car to main Citroen garage,
so at this time I'm hoping to get a used
top matrix , if I had no other jobs to be done
would go to Baker .
( Will give it a month if nothing turns up
will have to rethink .)
Thanks for your help on this.
Re: bx16v top heater matrix hose
Posted: Sat Jan 03, 2015 11:00 am
by greendale65
Hello again, Would you know the diameter on these matrix hoses.
Thanks Alan
Re: bx16v top heater matrix hose
Posted: Mon Jan 05, 2015 10:36 pm
by Vanny
Service Citroen lists the upper hose as
HEATER WATER HOSE
DIAM 19,2X27,4
So I would guess 19.2mm id and 27.4mm OD.
And the lower hose as
HEATER WATER HOSE
DIAM INT 20 ET 22
Re: bx16v top heater matrix hose
Posted: Tue Jan 06, 2015 9:56 am
by greendale65
Vanny wrote:Service Citroen lists the upper hose as
HEATER WATER HOSE
DIAM 19,2X27,4
So I would guess 19.2mm id and 27.4mm OD.
And the lower hose as
HEATER WATER HOSE
DIAM INT 20 ET 22
Thanks will give it a go.