hose for my valver.
![Cool 8)](./images/smilies/icon_cool.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Happy new year to you all.
![Smile :)](./images/smilies/icon_smile.gif)
![Smile :)](./images/smilies/icon_smile.gif)
Hello Vanny, Reason at the moment not buying from bakersVanny wrote:Without wishing to create a duplication of the many BXClub threads, can I just double check that you don't want to buy a set of silicon hoses from Bakers because of cost?
Top hose is part number 96 016 146
Bottom hose is part number 95 630 937 for a phase 1, 96 103 041 for a phase 2
These hoses are no longer available from Citroen, but you might find a set if you Google the part numbers
Hello again, Would you know the diameter on these matrix hoses.Vanny wrote:Have you considered a generic flexible hose such as these
http://www.hoseworld.com/acatalog/UNREI ... _HOSE.html
I use hose world a lot through work so can recommend them
Thanks will give it a go.Vanny wrote:Service Citroen lists the upper hose as
HEATER WATER HOSE
DIAM 19,2X27,4
So I would guess 19.2mm id and 27.4mm OD.
And the lower hose as
HEATER WATER HOSE
DIAM INT 20 ET 22