Page 1 of 1
16v bits wanted
Posted: Thu Feb 20, 2020 12:46 pm
by Niko9
Hi, all finally got my hands on a 16 valve so I’m now gonna be a pain in the arse and probably ask loads of stuff. But firstly I’m after a n/s/f fog light and the bx 16 valve badge for the boot. I’m sure there’s loads floating about
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: 16v bits wanted
Posted: Sun Feb 23, 2020 1:25 pm
by Dave
Of the two, fog lights appear the easier to get and not that costly. Further down the page is the driving light as seen on 309's etc.
https://www.bowerspartsonline.co.uk/lig ... 09-405-gti
Welcome to the club.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Re: 16v bits wanted
Posted: Mon Feb 24, 2020 8:16 am
by Niko9
Cheers Dave . I’ve ordered 1
![🤞](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f91e.svg)
it looks ok.
Re: 16v bits wanted
Posted: Mon Feb 24, 2020 8:55 am
by Dave
Pleased to have helped. Hopefully will be fine, let us know.
Re: 16v bits wanted
Posted: Thu Feb 27, 2020 8:13 am
by Niko9
Hiya Dave , fog light looks good for the money, good close match.
Re: 16v bits wanted
Posted: Thu Feb 27, 2020 6:39 pm
by Dave
Perfect, they are more for looks really because as a fog light, they are not that great. They are also quite prone to cracking if hit by a chipping. I bought some Peugeot covers that seemed to solve the issue when the car was in regular use.
I have been looking for the 16v emblem on various sites but no luck, I have only seen stickers.
Re: 16v bits wanted
Posted: Sat Feb 29, 2020 8:36 pm
by Niko9
Yeah the glass isn’t so strong, I’ve wrapped them with yellow vinyl which should help abit. I’ve seen the stickers but I’d rather wait.
Re: 16v bits wanted
Posted: Fri Mar 06, 2020 9:04 pm
by Vanny
Why not 3D print one?
Re: 16v bits wanted
Posted: Wed Mar 18, 2020 12:12 am
by Niko9
I wouldn’t know where to start
![😬](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f62c.svg)
Re: 16v bits wanted
Posted: Sun Mar 22, 2020 6:01 pm
by Vanny
Where are you based/where goes it need to get to?
I think I have one on a toolbox in the garage, it's in surprisingly good condition, but the white/silver lettering is very faded.
Re: 16v bits wanted
Posted: Mon Mar 23, 2020 9:53 pm
by Dave
You can touch up the lettering with a Molotow chrome pen and seal it with spray on acrylic varnish. Example below, see the pictures on the page.
https://www.amazon.co.uk/Molotow-Liquid ... B01E7EG3NM
Re: 16v bits wanted
Posted: Sat Mar 28, 2020 1:31 pm
by Niko9
Hi vanny, you got the bx16 valve tailgate badge?
Re: 16v bits wanted
Posted: Fri Apr 03, 2020 9:57 pm
by Vanny
Yes, found one in my desk drawer of all places
Re: 16v bits wanted
Posted: Sat Apr 04, 2020 6:47 am
by Niko9
Oh coooooooooool
![😁](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f601.svg)
will pm you
![👍](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f44d.svg)
![👍](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f44d.svg)
Re: 16v bits wanted
Posted: Sat Apr 04, 2020 7:42 am
by Niko9
Thx Dave