LEATHER WHEEL
- robin hughes
- 5000 rpm
- Posts: 592
- Joined: Mon Sep 04, 2006 5:08 pm
- Location: st austell, cornwall
Robin wrote:
The E reg is out on loan to a friend but is currently parked up feeling sorry for it's self at the moment
The F reg (pride and joy) is tucked up in the garage safe and sound for the winter
The G reg has been bought from Adie as a winter project. with the hope of saving it. I won't lie and say that it is rough around the edges, but has MOT untill Aug'07 and tax till Feb'07. I'm going to drive it around for a few weeks and see what I think.
Will have to get a few picture up of the showroom, sorry I mean driveway.
Mike P.
Yepso let me get this right. mike you now own 3 white phase 1,s an e,f,and g reg??????!!
The E reg is out on loan to a friend but is currently parked up feeling sorry for it's self at the moment
The F reg (pride and joy) is tucked up in the garage safe and sound for the winter
The G reg has been bought from Adie as a winter project. with the hope of saving it. I won't lie and say that it is rough around the edges, but has MOT untill Aug'07 and tax till Feb'07. I'm going to drive it around for a few weeks and see what I think.
Will have to get a few picture up of the showroom, sorry I mean driveway.
Mike P.
Founder member of the Phase 1 Appreciation Society!
- - - - -
'88 'F' White Bx16v - 62k miles & as seen on TV
- - - - -
'88 'F' White Bx16v - 62k miles & as seen on TV
- robin hughes
- 5000 rpm
- Posts: 592
- Joined: Mon Sep 04, 2006 5:08 pm
- Location: st austell, cornwall
Looks like the wheel will fit fine but sticks out from the dash quite a bit. But actually with my height (I am 6'2") I think this will be a lot better - the extra inch or so means I don't knock my knees on the wheel any more. Bonus!
So I'm wondering if I can move the stalk housing outwards along with the wheel
So I'm wondering if I can move the stalk housing outwards along with the wheel
Hi Jay,
I sold it July'05 to Tim2cv on this site
At the time I hardly used it and it was wasting away on the driveway at the old house.
He has since sold it on through ebay to a Citroen enthusiast.
But we've both learnt the errors of our ways and bought other 16v's since
Good to see you back on the forum
Mike P.
I sold it July'05 to Tim2cv on this site
At the time I hardly used it and it was wasting away on the driveway at the old house.
He has since sold it on through ebay to a Citroen enthusiast.
But we've both learnt the errors of our ways and bought other 16v's since
Good to see you back on the forum
Mike P.
Founder member of the Phase 1 Appreciation Society!
- - - - -
'88 'F' White Bx16v - 62k miles & as seen on TV
- - - - -
'88 'F' White Bx16v - 62k miles & as seen on TV
- robin hughes
- 5000 rpm
- Posts: 592
- Joined: Mon Sep 04, 2006 5:08 pm
- Location: st austell, cornwall
Oh you naughty bad bad man... now go sit in the corner... (if you haven't alredy done that).Mike P wrote:Hi Jay,
I sold it July'05 to Tim2cv on this site
At the time I hardly used it and it was wasting away on the driveway at the old house.
He has since sold it on through ebay to a Citroen enthusiast.
But we've both learnt the errors of our ways and bought other 16v's since
Good to see you back on the forum
Mike P.
Nice to see you've seen the error of your ways... in triplicate!
Now listen here you mullet...
- robin hughes
- 5000 rpm
- Posts: 592
- Joined: Mon Sep 04, 2006 5:08 pm
- Location: st austell, cornwall
- thanuttiscotsman
- 7000 rpm
- Posts: 1137
- Joined: Sun Aug 13, 2006 8:16 am
- Location: Scotland
hi there,
tell me about it!! had mine about 1.5 years spent over 4k and ive not driven a valver on the road properly yet! but saying that it will all be worth it when i finally do as ive modded mine a fair bit now. and thinking of parts already installed and yet to go in she should have about 170 bhp minimum if i dont buy any more crap.
rossco
tell me about it!! had mine about 1.5 years spent over 4k and ive not driven a valver on the road properly yet! but saying that it will all be worth it when i finally do as ive modded mine a fair bit now. and thinking of parts already installed and yet to go in she should have about 170 bhp minimum if i dont buy any more crap.
rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection
1990 BX 16v ph2 (now scrapped)
1990 BX 16v ph2 (now scrapped)
-
- Tick Over
- Posts: 28
- Joined: Mon Oct 30, 2006 7:56 pm
- Location: Stroud, armpit of the Cotswolds
LEATHER WHEEL
I think there's a way of fitting these leather wheels without them sticking out. The BX steering column is tapered, and the leather wheel tube is longer than the BX tube before you get to the splines. It therefore jams early and the splines do not go all the way. Ream out the first bit of the leather wheel's tube and hey presto it should slide home without sticking out. I'll do some measurements on this.
I'm too old for this
boss
Excellent Brian a few people have mentioned some bosses cause the wheel to sit proud of the stalks - luckily the OBA ones from ECP seem to sit about right though.
Cheers
Luke
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch