ZX spoiler

Anonymous · Post by **Anonymous** » Thu Nov 02, 2006 3:54 pm

Today i got mail, the postman had my zx-spoiler to be mounted on the top of the tailgate (correct?)

tried it but i have no exact idea of how to connect it...

anyone did that? perhaps with pics?

Marc

Post by **Toddman** » Thu Nov 02, 2006 5:55 pm

Marc - do you wish to fit the ZX top spoiler to a BX

Cheers
Luke

Anonymous · Post by **Anonymous** » Thu Nov 02, 2006 6:34 pm

Toddman wrote:Marc - do you wish to fit the ZX top spoiler to a BX

Cheers
Luke

Yep, that's what i mean. sometimes trouble with explaining in english

Anonymous · Post by **Anonymous** » Thu Nov 02, 2006 6:38 pm

The zx top-spoiler has got holes for fitting. But these holes are no way getting near a place for fitting. Have to do that otherwise...but how

robin hughes · Post by **robin hughes** » Thu Nov 02, 2006 6:39 pm

can it be bonded on?????

Timmo · Post by **Timmo** » Thu Nov 02, 2006 7:28 pm

is the zx spoiler not the one from the top of the window???? roof top spoiler rather than boot lip???

MoRtYMer · Post by **MoRtYMer** » Thu Nov 02, 2006 10:35 pm

Well probably you will have to glue it together..

Take some pictures too.

Post by **Toddman** » Thu Nov 02, 2006 11:02 pm

Most likely you will have to either bond it or screw it from behind through th etailgate as these spoiler sit at the top of the glass part of the tailgate.

Cheers
Luke

Anonymous · Post by **Anonymous** » Fri Nov 03, 2006 4:25 pm

I've got 1 pic of that spoiler which is on a valver i know:

just to give an idea...

but i rarely see the owner, then it would be simple then

Post by **Toddman** » Fri Nov 03, 2006 4:29 pm

I like that

Cheers
Luke

Anonymous · Post by **Anonymous** » Fri Nov 03, 2006 4:55 pm

Use the kit they normally use for placing windows.
But be sure you like it, 'cause it will be very difficult to remove!!!

Kitch · Post by **Kitch** » Fri Nov 03, 2006 5:43 pm

Dunno about that one, but the 16v one is much bigger and bolts through the rear window like a Saxo mk2.

robin hughes · Post by **robin hughes** » Fri Nov 03, 2006 7:05 pm

i like that too! must get one sorted for my 16v

Anonymous · Post by **Anonymous** » Sat Nov 04, 2006 9:27 am

WYD wrote:Use the kit they normally use for placing windows.
But be sure you like it, 'cause it will be very difficult to remove!!!

i know

almost 50% of the stuff i put on my bx is kitted with this. works fine!

Will try to fit the spoiler this afternoon. Saw that the thingy to spray water on the backwindow is in the way....i would like to keep this original so it will take some improvising. But that's my midlle name

Bolting through the window is no option i geuss, have no idea of how to do that. The top of the spoiler is too thin for screws. It has to look perfect otherwise i will not do it

thanuttiscotsman · Post by **thanuttiscotsman** » Sat Nov 04, 2006 9:29 am

yup it looks nice.

im gonna get one from the scrappers and see how she fits.

rossco

BX16V.com Forum

BX16V.com Forum

ZX spoiler

ZX spoiler

zx

Re: zx

ZX

spoiler