For sale soon!

Offer your parts and cars for sale here.
cavmad
Tick Over
Posts: 50
Joined: Wed Aug 09, 2006 7:18 pm
Location: West Cheshire.

For sale soon!

Post by cavmad »

One set of (BX) Morettes in mint condition, currently in BX white but should easily spray up to match your colour.
These were extremely hard to find (well, they were for me) and are in perfect working order.
Hard to price I guess but I`d like £150 for them and will post out if required.

I also have a nice set of 6J non-standard BX alloys with matching Goodyear 195-60-14`s, look the part and different to the usual BX wheels (will try and photograph them and post a picture up). Had them on my estate without too much trouble (no rubbing or mod`s to arches required). Offers circa £150. Postage probably possible but I don`t think it will be cheap. Willing to meet up withing about 40 miles of here (West Cheshire) for fuel costs only.

One BX white bonnet (plastic, from a GTi 4x4) c/w with fitted Subaru style vent. Looks really good and in good order, ready to fit. £35 plus your standard white bonnet in exchange?

I`ll also have a couple of BX cars availabe soon, including a TXD 1.9 n/a estate with about 6 month`s MOT and possibly a smart looking 1.9GTi with long MOT.

If amnyone is intererested and wants to contact me please pm me here or better still on the BXClub forum. Failing that have words with Vanny who is quite local to me.
Recovery, delivery/collection and scrap and unwanted vehicles collected West Cheshire area. Cash paid for most abandoned, unwanted and scrap vehicles if local, anything considered.
tim leech
7000 rpm
Posts: 1187
Joined: Sun Aug 06, 2006 9:25 pm
Location: derbyshire

Post by tim leech »

Good luck with the sale Cavmad, didnt knwo morettes were worth that much! Think I will stick with my current headlights!
cavmad
Tick Over
Posts: 50
Joined: Wed Aug 09, 2006 7:18 pm
Location: West Cheshire.

Post by cavmad »

Cheers, they`re only worth that much if someone is prepared to pay that for them!
I don`t especially want to sell them but could do with raising some funds, I`m open to offers but I`ll happily keep them if not.
Plan is to have a bit of a clear out and then get a TZD estate.
Recovery, delivery/collection and scrap and unwanted vehicles collected West Cheshire area. Cash paid for most abandoned, unwanted and scrap vehicles if local, anything considered.
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

hi there,
morettes? is that the quad headlights or what is it?

cheers rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
User avatar
Mike P
Moderator
Posts: 1183
Joined: Mon Jul 03, 2006 11:46 am
Location: Leicester, UK

Post by Mike P »

Billy,

You have PM regarding Quads.

Regards,

Mike.
Founder member of the Phase 1 Appreciation Society!
- - - - -
'88 'F' White Bx16v - 62k miles & as seen on TV
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

aha so morettes are quads then. 8) :wink:
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
cavmad
Tick Over
Posts: 50
Joined: Wed Aug 09, 2006 7:18 pm
Location: West Cheshire.

Post by cavmad »

Mike P wrote:Billy,

You have PM regarding Quads.

Regards,

Mike.
Cheers, Mike. Have replied mate. Off out fairly soon so if you respond again it might be a while before I can reply.
Recovery, delivery/collection and scrap and unwanted vehicles collected West Cheshire area. Cash paid for most abandoned, unwanted and scrap vehicles if local, anything considered.
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

tns, yes matey! morettes are quads!!
they fecth odd amounts on ebay when and where they pop up! i paid £180 for mine 2 1/2 years ago, the next set came up went for £150 iirc then one set made £90 then the last set made £49!! odd realy! but they are a good mod to any bx! gives twice the amount of light and makes the front look a whole lot better imo!
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
User avatar
robin hughes
5000 rpm
Posts: 592
Joined: Mon Sep 04, 2006 5:08 pm
Location: st austell, cornwall

Post by robin hughes »

:lol: the quads that made £90 were mine lol
The citroen bx 16 valve loves garages hates driving
1990 escort rs turbo 220 bhp
1992 bx 16 valve phase 2 red
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

were yours the left hooker ones rob or was that the ones after yours??? i htink it may have been the cheaper ones as if my memory serves me correctly they were already painted red?????
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

hi there,
i might do one of my rossco specials and try making some from the many bmw's in my locak scrappers.

rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
cavmad
Tick Over
Posts: 50
Joined: Wed Aug 09, 2006 7:18 pm
Location: West Cheshire.

Post by cavmad »

I had the same idea Rossco as I weighed in a 735 a year or so ago and kept the headlights off it. I suppose I should I should measure up the surrounds on the Morrettes and see if someone can knock some up for me.
Recovery, delivery/collection and scrap and unwanted vehicles collected West Cheshire area. Cash paid for most abandoned, unwanted and scrap vehicles if local, anything considered.
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

hi there,
yeah well im defo going to give it a shot. i sucessfully fabricated and adaptor for a round to square conversion for my k+n and it works perfectly and i even got to make it red, 100 percent the way i wanted it. im sure makeing the casing would not be too difficult. some plastic and fibre glass followed by some filler and paint, i really enjoy trying this stuff. what models of bmw have the best size lights??? just the 735 or others aswell??

rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
User avatar
Timmo
Full Throttle
Posts: 2233
Joined: Tue Jun 27, 2006 3:30 pm
Location: Cornwall! Tis where they make Oggy's!
Contact:

Post by Timmo »

tns, dig out the thread where one of our guys did it and youll find your answer matey!
i know the old 3 series ones are the same as i measured up on a suspect abandoned car out side my house not long back! :shock: :D
Timmo 8)

After all i am the Cornish one!

Its Because its French!
Bx16v club - Sharing the love for the unloved!
User avatar
thanuttiscotsman
7000 rpm
Posts: 1137
Joined: Sun Aug 13, 2006 8:16 am
Location: Scotland

Post by thanuttiscotsman »

excellent!!!!!! 8) there are more 3 series in scrappers up here than there is bx's!!! hehehehehehe 8) :lol:

cheers rossco
1989 BX 16v ph1 Big project chipped, k+N, scorpion s/s, weber throttle body, Nitrous injection

1990 BX 16v ph2 (now scrapped)
Post Reply