Make requests for parts and cars here
jayw
5000 rpm
Posts: 609 Joined: Mon Oct 30, 2006 3:31 pm
Location: Uranus
Post
by jayw » Tue Jan 02, 2007 10:46 pm
Need BE3 Clutch Bearing (the plastic one)
And a shaft sleeve (think they're the same on both BE1 & BE3), that's the metal sleeve that goes over the input shaft and has a triangle base bolted to the bell-housing with 3x 10mm bolts IIRC.
Please PM if anyone's got.
Cheers! Jay.
Now listen here you mullet...
jayw
5000 rpm
Posts: 609 Joined: Mon Oct 30, 2006 3:31 pm
Location: Uranus
Post
by jayw » Thu Jan 04, 2007 3:05 pm
Bump!
Now listen here you mullet...
Vanny
Web Support
Posts: 1570 Joined: Tue Jun 06, 2006 10:11 am
Location: BXProject
Contact:
Post
by Vanny » Thu Jan 04, 2007 5:49 pm
if there the same then i presume any BE1 or BE3 gearbox would be a donor?
jayw
5000 rpm
Posts: 609 Joined: Mon Oct 30, 2006 3:31 pm
Location: Uranus
Post
by jayw » Thu Jan 04, 2007 6:26 pm
The sleeve is the same but i have niether spare box to take it off.
I'd buy a new bearing, but can't find anywhere to sell one seperate from the clutch. GSF listed it but when i bought it online they rang me to say it was n/a.
Hoping someone's got a spare kicking around.
Now listen here you mullet...
Gary C
4000 rpm
Posts: 438 Joined: Thu Aug 03, 2006 5:36 pm
Location: Gatwick
Contact:
Post
by Gary C » Thu Jan 04, 2007 7:31 pm
I have a bitsa box which probably has a sleeve etc. Check it out in the morning.
Gary C
4000 rpm
Posts: 438 Joined: Thu Aug 03, 2006 5:36 pm
Location: Gatwick
Contact:
Post
by Gary C » Sat Jan 06, 2007 7:43 pm
Have a Valeo bearing. Both spare boxes have a triangular plate.
Gary C
4000 rpm
Posts: 438 Joined: Thu Aug 03, 2006 5:36 pm
Location: Gatwick
Contact:
Post
by Gary C » Mon Jan 15, 2007 7:27 pm
Do you still want these parts?
jayw
5000 rpm
Posts: 609 Joined: Mon Oct 30, 2006 3:31 pm
Location: Uranus
Post
by jayw » Mon Jan 15, 2007 9:20 pm
Yes please, did PM you a while back.
Now listen here you mullet...