Does anyone know which bits i need to replace to cure my sloppy wobbly gearstick. Is it just caused by a worn bush or something?
Also, don't know if anyones seen those Grp N gear rods on ebay for the 205 but was wondering if they'd fit the BX in conjunction with a quickshift kit?
Cheers, Jay
Sloppy Stick
Sloppy Stick
Now listen here you mullet...
linkage
Best bet is to just replace the plastic cups that clip onto the balls as they often wear and then just pop off at annoying times.
On the quickshift thing the special kits are not too good for track or race use as they just end up beating the synchros - a very good mod though is to do the mod to the L shaped arm on the gearbox, it costs nothing but a bit of time and some welding and works brilliantly.
http://www.205gti.com/main_uk.htm
Go in and click 205 Technical then Quickshift.
Cheers
Luke
On the quickshift thing the special kits are not too good for track or race use as they just end up beating the synchros - a very good mod though is to do the mod to the L shaped arm on the gearbox, it costs nothing but a bit of time and some welding and works brilliantly.
http://www.205gti.com/main_uk.htm
Go in and click 205 Technical then Quickshift.
Cheers
Luke
Please call me Luke
1989 BX 16valve White 70k almost up to scratch
1989 BX 16valve White 70k almost up to scratch