Make requests for parts and cars here
Anonymous
Post
by Anonymous » Tue Mar 27, 2007 4:54 pm
Part Number(s)
96016907 or 96034027
Which one exactly apparently depends on the RP number but can't find it!
It's supposed to be around the turrets somewhere, but I can't see it.
Can anyone help?
Cheers Steve
Kitch
5000 rpm
Posts: 737 Joined: Sun Aug 06, 2006 12:52 pm
Post
by Kitch » Tue Mar 27, 2007 5:32 pm
Doesn't it run over the gearbox? Just over a foot long?
Vanny
Web Support
Posts: 1570 Joined: Tue Jun 06, 2006 10:11 am
Location: BXProject
Contact:
Post
by Vanny » Tue Mar 27, 2007 5:43 pm
paint code is by the front N/S suspension turret
RP code is etched/sprayed into the A'pillar behind the passenger door (open the door and its above the swing arrester)
jayw
5000 rpm
Posts: 609 Joined: Mon Oct 30, 2006 3:31 pm
Location: Uranus
Post
by jayw » Tue Mar 27, 2007 7:34 pm
As Kitch said, i'm pretty sure thats the steel pipe out of the pump which is on top of the gearbox. There are 2 types depending on which entry you have on the pump. (side entry on the old ones / front entry on the later ones)
Now listen here you mullet...
Anonymous
Post
by Anonymous » Wed Mar 28, 2007 6:43 am
Brilliant Guys, Thanks...
Will check RP number tonight, the pipe is the one you described, but goes straight into pump without the 90 deg bend.
Will get back...
Anonymous
Post
by Anonymous » Wed Mar 28, 2007 7:08 am
Right, the part rep number is 5226.
I need this urgently guys so if anyone has a spare going, I can get some PO's out to them for a reasonable price and postage.
Easter approaches and I need to get home next Thursday for Easter hols!
Thanks for your help
Steve S
dougaldog
Tick Over
Posts: 68 Joined: Fri Jul 07, 2006 10:44 pm
Location: Leighton Buzzard, Bedfordshire
Post
by dougaldog » Wed Mar 28, 2007 8:15 am
Get in touch with Pleiades on 01487 831239. Quote them the RP number, give them the rough measurement for double-checking and they'll make you the pipe.
Anonymous
Post
by Anonymous » Wed Mar 28, 2007 10:36 am
Do you know if they will need the ends of the old one or anything like that?
dougaldog
Tick Over
Posts: 68 Joined: Fri Jul 07, 2006 10:44 pm
Location: Leighton Buzzard, Bedfordshire
Post
by dougaldog » Wed Mar 28, 2007 6:38 pm
No, they make the correct-sized ends with the pipe. New seals are supplied also.
Anonymous
Post
by Anonymous » Thu Mar 29, 2007 7:08 am
Okay for future reference its 58cm!